This message was posted by Aaron on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/38.html#000006 Juli, If you open a design (.dst, pes, exp.cnd, etc.) in AMAYA OS you can then change the colors to what you want, then you can click on the Notepad button and type any notes you would like. After you have everything where you want it you can then do a Save As ... and then save it as a .ofm file. Then you have your original file saved as dst, pes, whatever and in addition you have a ofm file as well. Next time you run this job just open the ofm file and your colors and setting should be there still. You still have your original format as well in case you ever need to make changes to it. I do this all the time when my digitizer sends me my files in .dst (my digitizer uses Brother software and the other one uses Wilcom I think, maybe pulse) I open them in DS and then do as I listed above and then I have it in ofm. Each color change is listed as an expanded still so it doesn't change the way the dst sews even though I have it saved as a ofm. You should be able to do this in AM AYA OS if you don't have Design Shop to do it in. Hope this makes sense. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================