This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/23.html Here it goes again...same issue I had in Design shop 5 2 years ago...making slight changes, saving, then shutting down for the nite and restarting in the morning...changes are gone. For example, lettering-small type-set min. width to 8, density to 4, save as new file #, run a few hats, etc. then shut down. Came in this morning, opened Amaya and last design came up, ran a hat and thread breaks every single letter multiple times...opened up design shop just to double check, and open that last saved file by number. Checked properties on the fonts, and both lines had reset to 3.5, min width 0.... had to start all over to double check changes. Saved again, shut DS off, restarted, changes are there. Ran a couple hats, no problem. Anyone have a clue what's going on here? Other designs with lettering have done the same thing-all changes saved magically default back to 3.5 and 0.... =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================