This message was posted by Pure Embroidery on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/96.html I installed the latest version of OS and have found that I can no longer make minor edits in OS. When I click "edit" my Design Shop Pro+ opens. Not a big deal, but if I happen to be editing design "A" and sewing design "A" I have problems. Here's what happened. *Loaded design "A" to OS and began sewing. *Started editing design "A" in DS while still sewing. *Stopped sewing because of thread issues and decided to "reload and reset" design "A" in OS. - I saved my work on design "A" that I had completed in DS and closed the design in DS - I didn't like the alignment of design "A" in OS, so I clicked "edit" in OS and the design opened in DS. At this point I had two versions of the same design. One was saved the other came from OS. I moved the design as I wanted it and sent it back to OS. At this point, my saved version of design "A" was over-written with the OS version of design "A" and all my changes were lost. About 45 minutes of work, but lots of details. Why did this happen, and how do I prevent it from happening again? =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================