This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1331.html When I have a letter M, for instance, and use the Auto Borders, the deep v's need the corners to be changed. I click on corners and select the top one, but nothing changes. So, this weekend, when doing three big designs on Welcome mats where people will be walking on them, it was important to not have a thick buildup of thread. So I tried to fix those pesky corners. I finally found that if I set the "Corners" feature to the top selection, I then had to go in and delete the "stitch directions" right at the corners that I wanted to fix.. Once I deleted both direction lines (one on each side), that solved the problem. Do you think this is a glitch in V9? And where do we report these? Juli =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================