[amayausers.com] Re: Corel Draw X3
- From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 1 May 2009 10:44:50 -0700
Sorry Jo, I left early yesterday and am getting in late today,
You can always send me the file as well. and I can help you.
I am not sure exactly what you are trying to do from your description.
My first guess is that it may need to be ungrouped and then the parts you don't
need could be deleted?
or is it all on unit and not grouped, in that case you would need to use the
break apart command (ctrl-k)
then re combine after you were done.
These are all guesses until I know what you really need.
So write back or send it to me and we'll get you going.
Sincerely,
Ron Vinyard
Body Cover Design
420 SW H Street
Grants Pass, OR 97526-2532
541-471-1504
1-888-435-0176
Fax 541-471-0427
www.bodycoverdesign.com
----- Original Message -----
From: Jo Leftwich
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, April 30, 2009 3:59 PM
Subject: [amayausers.com] Re: Corel Draw X3
Ron, Thank you for replying. I am trying to just take two parts of this
file to the cutter. I have never had a file like this and it has been so long
since I've done anything with Corel, I am lost.
Jo
Jo@xxxxxxxxxxxxxxxx
Just Sew It Custom Embroidery
14893 Deer Run Rd
Delta, Colorado 81416
970-874-7899
--- On Thu, 4/30/09, Body Cover <info@xxxxxxxxxxxxxxxxxxx> wrote:
From: Body Cover <info@xxxxxxxxxxxxxxxxxxx>
Subject: [amayausers.com] Re: Corel Draw X3
To: amayausers@xxxxxxxxxxxxx
Date: Thursday, April 30, 2009, 4:13 PM
I'm here to Help Jo,
what are you trying to do?
Sincerely,
Ron Vinyard
Body Cover Design
420 SW H Street
Grants Pass, OR 97526-2532
541-471-1504
1-888-435-0176
Fax 541-471-0427
www.bodycoverdesign.com
----- Original Message -----
From: Jo Leftwich
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, April 30, 2009 2:42 PM
Subject: [amayausers.com] Re: Corel Draw X3
John, I can't get the file like I want it to export. I have
the button and I can cut it once I get it straightened out in Corel. I just
have no clue how to handle this file.
JO
Jo@xxxxxxxxxxxxxxxx
Just Sew It Custom Embroidery
14893 Deer Run Rd
Delta, Colorado 81416
970-874-7899
--- On Thu, 4/30/09, theboards@xxxxxxxxxxxxxx
<theboards@xxxxxxxxxxxxxx> wrote:
From: theboards@xxxxxxxxxxxxxx <theboards@xxxxxxxxxxxxxx>
Subject: [amayausers.com] Re: Corel Draw X3
To: amayausers@xxxxxxxxxxxxx
Date: Thursday, April 30, 2009, 3:19 PM
-----Inline Attachment Follows-----
This message was posted by levelbest on AmayaUsers.com.
PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/11/45.html#000001
Jo:
Is it a rolland cutter? If so, you use the cut studio
plugin - that's the easiest method to export from corel out to the cut studio
program.
JOHN
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
--------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.9/2087 - Release Date:
04/29/09 18:03:00
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.9/2087 - Release Date: 04/29/09
18:03:00
Other related posts:
