This message was posted by Dorothy Compton on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/223.html#000004 I would make sure that there is no lint in the casing and then check your bobbin tension. Since normal bobbin thread is thicker than 40wt embroidery thread (which may be what the bobbins have--you should be able to check with Don at Terradon Embroidery), the tension will have to be adjusted. Check how the bobbin drops with a regular bobbin, then adjust the tension with the colored-bobbin to match it. Hope this helps. Dorothy Compton, Owner Bee Embroidered www.BeeEmbroidered.com (http://www.BeeEmbroidered.com) (916) 635-7467 Rancho Cordova, CA =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================