[amayausers] Re: Color Index Error
- From: "John Yaglenski" <john@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 12 Sep 2005 23:33:01 -0400
Woo hoooooooo! :)
Good to hear!
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of LiVawne G. Moore
Sent: Monday, September 12, 2005 11:26 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Color Index Error
Thanks to all who replied. I cleaned out the folder, turned everything off,
even the computer and started back up. When I loaded a new design it lined
up correctly and is sewing now.
LiVawne
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of John Yaglenski
Sent: Monday, September 12, 2005 9:44 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Color Index Error
Try cleaning the design out of the OS. There is a folder that holds designs
you are currently sewing in something like c:\program
files\melco\amaya\current (not sure of the exact name as I am not in front
of the machine.
Delete the .ofm files in there, then shut down os, shut down amaya.
Then start up OS, start up amaya, load design and see how it goes...
JOHN
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Itchin To Stitch
Sent: Monday, September 12, 2005 10:08 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Color Index Error
Try using the Help area of the Users manual, either the printed manual or
the one located in OS. This might be an error that is listed there and it
will tell you exactly what to do to fix. You have nothing to lose by
looking....
Wendy Solomonson
Itchin' To Stitch
Arlington, MN
(507)964-2224
----- Original Message -----
From: LiVawne G. Moore <mailto:Moore-Embroidery@xxxxxxxxxx>
To: amayausers@xxxxxxxxxxxxx
Sent: Monday, September 12, 2005 8:36 PM
Subject: [amayausers] Color Index Error
I have been sewing the same design for about 2-3 hours without any problems.
I just loaded a new design and am getting a color index error. The needle
is not in the proper alignment to sew. It won't sew, hit the green button
and nothing happens. I have turned everything off and left it for a while
and turned it back on, didn't help.
Any suggestions to get this back on line is much appreciated. We are so
busy and can't stand to be down for long.
Sincerely,
LiVawne G Moore
Moore Embroidery & Designs
1724 Jerusalem Drive
Round Rock, TX 78664
512-989-0518 Office
512-632-7826 Cell
Moore-Embroidery@xxxxxxxxxx
<file://www.Moore-Embroidery.com> www.Moore-Embroidery.com
Other related posts:
