I know that Robert Parker at Melco has a chenille fill. It might take awhile but if you email he will send it to you. RParker@xxxxxxxxx Margaret Jannuzzi wishesinstitches@xxxxxxx -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of webmaster@xxxxxxxxxxxxxx Sent: Thursday, December 14, 2006 11:48 AM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Chenille Look This message was posted by Russell Silva on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/63.html#000001 I have never done it but I am told you create a fill with a kind of short stitch length, I am guessing around 25pts, then when you so to the AOS you have to turn off bobbin and thread break detection, turn actifeed to manual and set material thickness to 30 or more, it is something you will have to play around with to get it to work right but I have seen stuff done with that effect, if there are other element types in the design, you will have to use settings by color so you can bring the material thickness back to normal. Others might have a better explaination but this may get you started. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================