[amayausers] Re: Changing settings
- From: "Body Cover Staff" <info@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxxxxx>
- Date: Fri, 9 Apr 2004 15:52:23 -0700
Thanks Jack
I will give it a try!
How can we live without the "Techs"!!
Ron Vinyard
Owner / Graphic Designer
Body Cover / Magic Stitches
420 S.W. "H" Street
Grants Pass, OR 97526-2532
1-888-435-0176
1-541-471-1504
Fax 541-471-0427
www.bodycoverdesign.com
----- Original Message -----
From: "Jack Fuller" <jack@xxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, April 09, 2004 3:47 PM
Subject: RE: [amayausers] Changing settings
> Ron
> Bring the design up in the OS and save it with a new file with the
settings
> you want to keep. Version 5.07 is different from 4.02. Apparently you
can't
> save it as the old file if it is already up. What I have take to doing is
> saving each one as a new version such as ABCD V1. If I want to save any
> changes I incriment up by another .1. So a second change to ABCD v1 would
be
> ABCD V1.1 I know to use the latest file. Also, depending on the design,
your
> machine can easliy run 1300 spn without appreciable quality degradation.
If
> you can't run faster than 700-800 there may be a problem that you need to
> look at. I just finished a job where I had horrible machine and design
> problems. After the machine was repaired and the design was re-digitized I
> found I got better results at 1300 than at 1000-1100. So if there is a
moral
> to this story it may be: "Go faster first". BTW - THANKS IN A MAJOR WAY TO
> YOUR FRIEND AND MINE, ROD SPRINGER, MELCO TECH EXTRORDINARY!
>
> -----Original Message-----
> From: Body Cover Staff [mailto:info@xxxxxxxxxxxxxxxxxxx]
> Sent: Friday, April 09, 2004 2:50 PM
> To: amayausers@xxxxxxxxxxxxxxxx
> Subject: [amayausers] Changing settings
>
>
> Hey Gang,
> we just installed the latest update, Amaya flex and I believe its version
> 5.something
> anyway with out scouring the manual can anyone tell me an easy way to
change
> the default
> speed setting from 1200 to a lower speed. at each start up in the morning
> all the machines
> set to 1200 which is fine sometimes but we get better results at a speed
> closer to 700-800
> it doesn't seem to remember where we left it the day before. : )
> and also it is reloading the design last sewn on each machine, which may
be
> feeding in from the
> machine buffers but is there a way to have it start every day with a clean
> slate?
> Thanks in advance for the help
> I can call Melco, or do like I'm supposed to and work with the Help files
or
> Scour the manual,
> but you guys are so much more fun.
>
> Ron Vinyard
> Owner / Graphic Designer
> Body Cover / Magic Stitches
> 420 S.W. "H" Street
> Grants Pass, OR 97526-2532
>
> 1-888-435-0176
> 1-541-471-1504
> Fax 541-471-0427
> www.bodycoverdesign.com
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
Other related posts:
