[amayausers.com] Re: Black boarder of design not following the main part

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Thu, 7 May 2009 01:30:00 UT

This message was posted by Bill C @ Fineline on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/686.html

We ran this design that had a gold halo with a black boarder around it and the 
boarder did not follow the gold. Ran the same design on 3 other machines and it 
was ok.  Had a Tech look at it and he could not find anything wrong. He said it 
might need a new motor?  This does not sound right.  Any IDEAS. Need to get it 
running.  These are Amaya XTs 2006  Thanks, Bill

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: