This message was posted by Digital Stitch on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/373.html I did a search of the forum, but I'm still not sure the best way to hoop for sewing on the back of caps. We have tried several sizes of the round hoops and each time, the cap just "pops" right out of the hoop -- no matter how tight we set the retainer ring. We are working over a corner of a table and trying to pull the cap as flat as possible. We end up only being able to fill the hoop 50% with the hat. Our ultimate goal is to be able to sew a name above the rear opening of the cap--trying to match the curve of the opening. Should we be using our cap frame instead of the round hoops? Is there a slimline bracket that would work slick for this? THANKS! =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================