[amayausers] Re: At my wits end!!
- From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 19 Sep 2005 12:37:01 -0500
Have you made sure your needle is in correctly. We had that problem
yesterday. It turned out to be the needle in backwards!
Terri
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of image embroidery
Sent: Monday, September 19, 2005 11:10 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] At my wits end!!
Okay list...
Here is your challenge for the day. More often than not whenever my Amaya
starts to stitch, the thread does not grab the bobbin and it pops out. I
re-thread this machine more than I can stand.
It happens as it is attempting to put down those first few stitches and it
is moving slow.
Is it bobbin tension? Needle angle? Material thickness?
If anyone can offer any words of wisdom, I would be forever grateful!
Off to re-thread!
Thank you so much.
LuAnn @ Image Embroidery
Because Your "Image" Matters
Other related posts:
