[amayausers.com] Re: 3D Foam Revisited

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Mon, 20 Apr 2009 15:43:56 UT

This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 

The heavy duty ones are sold as 'paint remover gun'.
I have several different ones-the best is one with a flat 'back' to it, so you 
can sit it down with the nozzle pointing straight up-instead of setting it down 
and burning something. That one gets used to shrink wrap small items at our 
retail store-you can just hold the item above the gun and spin it around. What 
you want to look for is one with more than one heat/air position (low, medium, 
high) or at least low & high-so you can use the right setting to melt your foam 
and not burn the item.


The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list


Other related posts: