Hello All,
I thought I'd send along this information that I did not know about.
It's an accessible installer for Arch Linux. Some of the problem is that
the web site is called JenniOS and the installer is Jenux - which makes
searching for it difficult if not impossible.
#arch #installer #accessible #blind
Jenux Installer (x86_64)
<https://nashcentral.duckdns.org/projects/Jenux-2019.03.05-x86_64.iso>
This is a bootable DVD image that can be used to install either android or
a fully accessible Arch Linux based System called Jenux. It runs on any
intel-compatible (64-bit) computer. To start the install, select install
Jenux on this device from the main menu. If you are familiar with the Linux
command line, you can use this image to repair a damaged system. both
csm(legacy bios) and uefi compatible systems. The Jenux installer also has
the ability to flash an image to an sd card compatible with the Raspberry
Pi series of single board computers, as well as reset a forgotten windows
password.
Jenux Net Boot script for linux
<https://nashcentral.duckdns.org/projects/jenuxnetboot>
This script, executed as root, will allow you to boot the above jenux iso
on any machine that supports PXE. It takes the full path to the iso and the
NIC that will be used to serve the bootloader, config file, kernel,
initramfs, and the jenux root file system as arguments. Simply download the
script and iso, connect the two machines with an RJ45 cable, and boot the
target over the network. The bootloader, kernel, initramfs, and rootfs will
be downloaded into the target's ram. As with other scripts, if your browser
shows you the script instead of downloading it, open up a terminal and run
curl -O https://nashcentral.duckdns.org/projects/jenuxnetboot;chmod 755
jenuxnetboot
