[access-uk] Re: xp network problem
- From: "Keith Barrett" <keith@xxxxxxxxxxxxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Sun, 02 Jan 2005 23:41:51 -0000
Hi Andrew,
I have checked and no ip address is displayed.
The result displays the windows version and some information about
documents and settings but no ip address.
On 2 Jan 2005 at 22:12, Andrew Hodgson wrote:
> Hi,
>
> Start | run | cmd to get command prompt up. Doing ipconfig won't do
> anything from run prompt because the command window will open, the
> program will run, display the info, then exit cleanly, causing the
> window to close only momentairly afterwards.
>
> The 1394 connection (I assume your message meant this) would also
show
> up as a network device, it is a small port which sort of resembles a
USB
> port but will have a edge to it (sorry for explaining this poorly). It
> is for connecting cameras etc, and gives high data transfer rates. You
> may not have a connector, as there may not be a port on the case, so
the
> pinouts on the motherboard would be there, they just wouldn't go to
> anything. On this machine which also has both ports, I have two items
> in the network applet, that of the LAN (Realtek Gigabit NIC) and a Via
> 1394 controler.
>
> As for the drivers, where exactly are you getting these from?
>
> Also, just checking you are looking in the right place, are you getting
> to device manager by going into control panel | system | hardware |
> device manager?
>
> Andrew.
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
> Of Keith Barrett
> Sent: 02 January 2005 20:22
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: xp network problem
>
>
> Hi Andrew,
>
> Nothing in other devices.
>
> How do I get to the command prompt in xp?
>
> Do you mean the run dialogue box?
>
> I get no response typing ipconfig in that box.
>
> Do you know what this 1934 network connection might be?
>
> Whenever I try to connect, I keep getting the message that the 1934
> network connection was unable to varify any ip information and nothing
> else.
>
> I did try to remove this connection in order to start again but I think
> I have made things worse as now, when I go in to i.e. it tells me I need
> to connect or work offline so it seems that it is not even looking for a
> network connection.
>
> When I select any option to do with that connection, I get an error
> message so I think I have really messed things up.
>
> Another install of xp?
>
>
> On 2 Jan 2005 at 16:10, Andrew Hodgson wrote:
>
> > Keith,
> >
> > What items do you have in the other devices category (if anything) in
> > the device manager? What happens when you do an ipconfig from
> the
> > command line (do you get an IP address in 192.168.x.x range)?
> >
> > Andrew.
> >
> > -----Original Message-----
> > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> Behalf
> > Of Keith Barrett
> > Sent: 02 January 2005 15:55
> > To: access-uk@xxxxxxxxxxxxx
> > Subject: [access-uk] xp network problem
> >
> > Hi Andrew,
> >
> > I have now reinstalled xp.
> >
> > In device manager, the only thing I can find is a 1934 network
> adapter.
> >
> > No mention of anything that resembles intel.
> >
> > So, do I now install the intel driver package?
> >
> >
> > Keith
> >
> > - -
> >
> > Keith Barrett
> >
> >
> > gw4nby
> >
> > Bridgend
> > South Wales
> > ** To leave the list, send a message to:-
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, send a
message,
> to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> > ** To leave the list, send a message to:-
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, send a
message,
> to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> Keith
>
> - -
>
> Keith Barrett
>
>
> gw4nby
>
> Bridgend
> South Wales
> ** To leave the list, send a message to:-
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, send a message,
to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, send a message to:-
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, send a message,
to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Keith
- -
Keith Barrett
gw4nby
Bridgend
South Wales
** To leave the list, send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
