Hi David, I can't help you on the wireless connection question. The wireless connections in my house are all for sighted people and do not even have Window-Eyes running on the PCs. We have used about 5 different cards, in a couple of Sony laptops, a couple of Dell laptops and a custom built desktop with only one compatibility issue that I am aware of. That was with the 2600 where the sid could not be hidden. As I had all other protection switched on I was not too concerned about this. Before installing the 2800 the PC which required the sid to be seen has been hard wired onto the lan so this is no longer an issue. Regards, John Contact on : (Home) john_farley@xxxxxxxxxxxxxx or : (work) john.farley@xxxxxxxx -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of David W Wood Sent: 27 August 2007 19:21 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: vigor routers Hi Keith and John: I bought my 2800 from Seg last year. I can't recall the reason why at that time. I use an old Belkin card from my lap top to the router here, but it is not easy to set up with JAWS - I use sighted help. What is the compatible card with the vigor? David -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Keith Barrett Sent: 27 August 2007 16:51 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: vigor routers Hi David I got my previous 2600 from www.seg.co.uk. They appear to carry the full range but I shall look around before I buy as I think ebuyer or dabs may have them cheaper? We have 4 wireless machines, a couple of netgear cards of different vintage and a belkin, keep meaning to try the matching card to the vigor. Any other suggestions on the cheapest place to get the 2800? On 27 Aug 2007 at 16:41, David W Wood wrote: > Hi again Keith: > A very useful site - thanks! > > I wonder where you shop for the Draytek gear? > Also, > Which wireless cards you use to talk to it? > > David > > > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of > David W Wood > Sent: 27 August 2007 12:42 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: vigor routers > > Hi Keith: > > I don't have any radio gear near to the ruter, but do notice > some noise on my broadcast long wave radio, it is within > about 2 feet of the router though! > > Tanks for the pointer - I will have a look at that site > when back home from the coast later today. > > David > > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Keith Barrett > Sent: Monday, August 27, 2007 11:06 AM > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: vigor routers > > Hi David, > > Thanks for your comments. > > Have a look at > > http://www.zensupport.co.uk/knowledgebase/article.aspx?id=10 > 034 > > I used this to set up my 2600. I presume the 2800 > is similar but will let you know when I get mine. > > You might want to look out for Andrew Hodgson who was on > this list at one time and was quite an expert on these > routers. > > > Just one more question, do you get any noise from your 2800 > on the hf > bands and does it stand up to rf? > > > > On 27 Aug 2007 at 10:36, David W Wood wrote: > > > HI Keith: > > > > I use the 2800 with no problems. > > 4 wireless, 4 RJ45 ports, and a printer port. > > This latter was a challenge to set up though. > > > > I am now trying to work out how to use VPN from a broad > band > > connection elsewhere - any guidance or resources welcomed. > > > > David > > > > > > -----Original Message----- > > From: access-uk@xxxxxxxxxxxxx > > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Keith > Barrett > > Sent: Sunday, August 26, 2007 10:23 PM > > To: access-uk@xxxxxxxxxxxxx > > Subject: [access-uk] vigor routers > > > > Any one know if the latest generation of vigor routers are > > still accessible? > > > > My 2600 we has blown up so am about to go shopping. > > > > Thanks > > > > Keith Barrett > > www.barrettpianos.co.uk > > skype keith.barrett1 > > Corntown, South Wales > > > > > > ** To leave the list, click on the immediately-following > > link:- > > ** > > > [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** access-uk-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on > > the > > ** immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following > link:- > > ** > [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** access-uk-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on > the > > ** immediately-following link:- > > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > > > __________ NOD32 2485 (20070826) Information __________ > > > > This message was checked by NOD32 antivirus system. > > http://www.eset.com > > > > > > > ** To leave the list, click on the immediately-following > link:- > ** > [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on > the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.484 / Virus Database: 269.12.9/975 - Release Date: 26/08/2007 > 21:34 > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.484 / Virus Database: 269.12.9/975 - Release Date: 26/08/2007 > 21:34 > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > __________ NOD32 2485 (20070826) Information __________ > > This message was checked by NOD32 antivirus system. > http://www.eset.com > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.12.9/975 - Release Date: 26/08/2007 21:34 No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.12.9/975 - Release Date: 26/08/2007 21:34 ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq