[access-uk] Re: to anyone who has the talking multimetre
- From: terry <terrycooper94@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 21 Aug 2011 21:50:26 +0100
I get exactly the same thing, but each time I click one turn clockwise to
the dc position, and attach the probes to the battery, I just get the ol
speech.
Terry
_____
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
david pritchard
Sent: 21 August 2012 19:07
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: to anyone who has the talking multimetre
Hi Terry
Just to confirm starting with the fully anti clockwise off position i get in
order clockwise :- dc volts, ac volts, resistance, capacitance, frequency,
dc milli-amps and off.
Hope this helps
David
From: terry <mailto:terrycooper94@xxxxxxxxxxxxxx>
Sent: Tuesday, August 21, 2012 3:31 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: to anyone who has the talking multimetre
Hi David
If I turn the dial two clicks anti clockwise, e.g. starting from 3 o'clock
on the dial, it says frequency, when I press the right hand side raised
button.
If I turn it one click anti clockwise, it says dc, just as it does if I turn
it one click clockwise, starting from the 9 o'clock position.
On the 10 o'clock dc position, I get the OL, and on the 2 o'clock dc
position, I get a minus milli volt reading.
Terry
_____
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
david pritchard
Sent: 21 August 2012 15:12
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: to anyone who has the talking multimetre
Hi Terry
ol is the resistance setting - try turning 2 clicks anti clockwise to get dc
volts
hope this helps
David
From: terry <mailto:terrycooper94@xxxxxxxxxxxxxx>
Sent: Tuesday, August 21, 2012 1:53 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] to anyone who has the talking multimetre
Hi all
I just got my multi metre out after not using it for ages, and could do with
a reminder of the buttons.
I'm trying to test a car battery, and have the dial turned to dc, about 10
o'clock on the dial. It just keeps saying "ol", when the prongs are attached
to the terminals.
What am I doing wrong? Also, does anyone have the manual for it?
Any help appreciated.
Terry
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3489 - Release Date: 03/07/11
20:43:00
Other related posts:
