hi jackie strange though as never had these issues re signal with the goodmans or the portset On 17 May 2012, at 11:17, Jackie Cairns wrote: > Hi Will and Sandra > > Our signal is poor on Freeview. It isn't the built-in Freeview on our Tosh > TV or the TVonics, it's just the signal strength. We also use a booster > which the chaps installed when they put up a digital roof aerial for us. We > get a message on the screen saying "low signal", and we often get spitting, > but it doesn't do it all the time, and I've made a few recordings on the > TVonics now and they play. It's just that the programme can be interrupted > with this horrible spitting, juddering sound that sounds like a bird in > distress or something. It can be quite loud and make you jump as it's > louder than the volume on the TV when it spits, but hopefully we'll benefit > when analogue is turned off, least that's the plan! > > > Kind Regards, > > Jackie Cairns > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of > Sandra Heaton > Sent: 17 May 2012 10:18 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: signal very poor iwth new freeview > > > Hi William, > > I know where you are coming from even though I haven't had the same thing as > > you but I think that in some areas the signal is not strong enough. Have > you thought about getting a signal booster? they are not very expensive > you can get one for £7.00 which you should be able to buy from any aerial > shack or most likely off eBay. I might have to get one for myself. > > Also have you wrote to tvonics I have, they should actually be able to > advise you as well. Unfortunately there is no contact number for tvonics > but they do have email. > > > I hope this helps. > > > Sandra > Braille Greeting Cards > www.braille-greetings-cards.co.uk > > ----- Original Message ----- > From: "william lomas" <will.d.lomas@xxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Thursday, May 17, 2012 6:38 AM > Subject: [access-uk] signal very poor iwth new freeview > > > hi all, my freeview receiver is mounted on the wall outside the block of > flats where i live and its signal is terrible with this new RNIB freeview > box, i keep losing signal, anyone else had this? > i assume whether i use scart or HDMI shouldn't make a difference? > only noticed this recently when I check the service status only getting 38 > to 40 percent signal on channels, strange as the west midlands area have > changed over fully to freeview. > with the portset freeview and the goodmans, had no problemw with the > freeview. my cables are all connected firmly fromw what i can tell > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq