[access-uk] Re: ruter security problems
- From: "John R. & guide dog Iris" <johnathanrichards@xxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 9 Mar 2008 17:27:48 -0000
hi John R. here
no luck in that as well.
so I guess it's a call to them in the morning thanks to all thoughs who have
tried to help
from John and guide dog Iris
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, March 09, 2008 4:22 PM
Subject: [access-uk] Re: ruter security problems
Hi John,
One last try perhaps before Monday's call.
See below, but use the 192.168.2.1 address, since somehow
that appears to have set itself.
George.
9. I forgot my password, or the password prompt always
appears when I am saving settings to the
Router.
Reset the Router to factory default by pressing the Reset
button for 10 seconds and then releasing it. If you
are still getting prompted for a password when saving
settings, then perform the following steps:
1. Access the Router's web-based utility by going to
http://192.168.1.1 or the IP address of the Router.
Enter the default password admin, and click the
Administration => Management tab.
2. Enter a different password in the Router Password field,
and enter the same password in the second
field to confirm the password.
3. Click the Save Settings button.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. &
guide dog Iris
Sent: Sunday, March 09, 2008 3:41 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: ruter security problems
hi John R. here
this is my problem, that address just throws an error 404
page can not be
found error.
but the other one, http://192.168.2.1
this gives me an user name and password window but I've
tried what the
manual says and it doesn't work maybe it's time to take this
further with
linksys
thanks
from John and guide dog Iris
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, March 09, 2008 3:36 PM
Subject: [access-uk] Re: ruter security problems
Hi John,
Leave the Username blank. The password is admin
Here's the relevant page.
George.
A. Open your web browser. Enter
http://192.168.1.1 in its
Address field. Press the Enter
key.
B. A password request screen will
appear. Leave the User name
field blank, and enter the
default password, admin, in
the Password field. (For added
security, you should later set a
new password, using the
Administration tab's
Management screen of the
Web-based Utility). Then click
the OK button.
C. The Web-based Utility will
appear with the Setup tab
selected. If requested by your
Internet Service Provider (ISP),
complete the Host Name and
Domain Name fields. (These
are usually requested by cable
ISPs.) Otherwise, leave them
blank.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. &
guide dog Iris
Sent: Sunday, March 09, 2008 3:27 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: ruter security problems
Hi George John R. here
I've saved you a job I've found the acrobat file from the cd
and uploaded to
sendspace it's 5mb big you'll find it at:
http://www.sendspace.com/file/phijsk
please help me get around this if I don't get anywhere this
time I'll be
calling a techniction in from I'va Linksys or from the store
I bort it
thanks
from John and guide dog iris
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, March 09, 2008 10:57 AM
Subject: [access-uk] Re: ruter security problems
Hi John,
What is the exact make and model of your router? Perhaps I
can track down an on-line manual. (Sorry if you've given it
before, but the thread's getting a bit long.)
It appears that IP address 192.168.2.1 is correct, and the
Username and Password should in theory be whatever the
manual says in the default. Have you tried Username admin
and left the Password blank? That's how my two Draytek Vigor
2600s were accessed.
But if we can track down a manual, it should be possible to
confirm or otherwise.
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. &
guide dog Iris
Sent: 09 March 2008 09:49
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: ruter security problems
hi everyone
thanks to those who are being pacient with me.
still I can't get around this.
no matter what I do no matter where I go in the run box or
internet explorer
open or internet explorer address bar, I get no where with:
http://192.168.1.1
I get the password and user name window come up when I use
the following:
http://192.168.2.1
and I'm only using 1 ruter so I dont know what's going on.
with the, 1.1, I get a delay then a message saying, the page
could not be
found. but with the 2.1, number, it asks me for a user name
and password
I've done what the manual says that don't work, I've tried
typing admin in
each box, I've tried using my internet ISP details but still
nothing. I've
even done a hard reset from the ruter hole point. but with
that there is a
delay then it goes back on to the internet
does anyone see a way out of this maze?
from John and guide dog Iris
----- Original Message -----
From: "Marie Baisez" <baisez.marie@xxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, March 09, 2008 8:41 AM
Subject: [access-uk] Re: ruter security problems
For what it's worth, the default username and password on
routers is
usually adnin, type these on the 2 edit fields when
prompted and see what
happens.
Hope this helps.
Marie
----- Original Message -----
From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, March 08, 2008 8:31 PM
Subject: [access-uk] Re: ruter security problems
John - I don't know that you'd be able to actually
download that wizard,
but
there will probably be a FAQ or trouble shoot on the
website; I'm a bit
muddled regarding your router's installation, I thought
it was already
installed, but from your below message it now sounds like
your stuck part
way through the installation? -
Andy
----- Original Message -----
From: "John R. & guide dog Iris"
<johnathanrichards@xxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, March 08, 2008 6:34 PM
Subject: [access-uk] Re: ruter security problems
| Hi Andy
| no I've got nothing on my desktop or my start menue's
or programs
menue's
| but when I go in to the control pannel and go to add
and remove
programs
| there the programs say, Braudcam or something like
that. but still
apart
| from there I can't find or access it.
| the problem is on the cd that came with the ruter there
is a set up
wizzard
| but when it gets about half way through and then it
asks for the admin
| password I enter the right one and leave the user name
blank but still
| nothing happends it just hangs there I've had someone
sighted have a
look
| and it just greys out and nothing happends and when you
go to task
manager
| it says the program isn't responding but I've done this
way over 10
times
| and every single time it does the same thing
|
| I'm wondering am I able to download that setup wizzard
from the linksys
| website?
|
| from John and guide dog Iris
| ----- Original Message -----
| From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
| To: <access-uk@xxxxxxxxxxxxx>
| Sent: Saturday, March 08, 2008 6:12 PM
| Subject: [access-uk] Re: ruter security problems
|
|
| > Hi John -
| >
| > Have you got an icon on your desk top for your
router? If so, click
on
| > that,
| > and you should be able to access from there, using
your log in
details.
| >
| > HTH -
| >
| > Andy
| > ----- Original Message -----
| > From: "John R. & guide dog Iris"
<johnathanrichards@xxxxxxxxxxxxxxxx>
| > To: <access-uk@xxxxxxxxxxxxx>
| > Sent: Saturday, March 08, 2008 5:08 PM
| > Subject: [access-uk] ruter security problems
| >
| >
| > | HI everyone I know this isn't very appropiate for
this list but if
| > someone
| > | could help on or off list will help.
| > | I've got a linksees ruter. I'm hard wired to the
ruter but it also
has
| > | wireless capabilities enabled. I know this because
my dads laptop
on
| > | wireless can connect to it as well.
| > | now the problem i'm facing is in the linksees
electronic manual it
gives
| > me
| > | the IP address, password, and user name to log in
to the ruter. and
| > telles
| > | me what should be coming up.
| > | now it says type that address in to the internet
browser, I've done
that
| > it
| > | says press enter and you'll get a logo logon
screan asking for my
| > password
| > | and user default names. but when I press enter on
that address I
get a
| > 404
| > | error, page can not be found. but yet I'm using it
now through the
| > ruter
| > so
| > | my question is:
| > | how can I configger the ruter when I can't get to
the settings?
| > |
| > | please can someone help me please?
| > |
| > | I'm going to be posting this on multiple lists for
help please if
you
| > see
| > it
| > | more then once can you help where you can but also
you can E-mail
me
off
| > | list as well on the following address:
| > | johnathanrichards@xxxxxxxxxxxxxxxx
| > |
| > | thanks for anyone's help
| > |
| > | from John and guide dog Iris
| > |
| > |
| > | ** To leave the list, click on the
immediately-following link:-
| > | **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
| > | ** If this link doesn't work then send a message
to:
| > | ** access-uk-request@xxxxxxxxxxxxx
| > | ** and in the Subject line type
| > | ** unsubscribe
| > | ** For other list commands such as vacation mode,
click on the
| > | ** immediately-following link:-
| > | **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
| > | ** or send a message, to
| > | ** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq
| > |
| > |
| > | --
| > | This email has been verified as Virus free.
| > | Virus Protection and more available at
http://www.plus.net
| >
| > ** To leave the list, click on the
immediately-following link:-
| > **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
| > ** If this link doesn't work then send a message to:
| > ** access-uk-request@xxxxxxxxxxxxx
| > ** and in the Subject line type
| > ** unsubscribe
| > ** For other list commands such as vacation mode,
click on the
| > ** immediately-following link:-
| > **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
| > ** or send a message, to
| > ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq
| >
| >
| >
| >
| > --
| > this message is clean
| > Checked by AVG.
| > Version: 7.5.518 / Virus Database: 269.21.6/1318 -
Release Date:
| > 07/03/2008 14:01
| >
| >
|
|
| ** To leave the list, click on the
immediately-following link:-
| **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
| ** If this link doesn't work then send a message to:
| ** access-uk-request@xxxxxxxxxxxxx
| ** and in the Subject line type
| ** unsubscribe
| ** For other list commands such as vacation mode, click
on the
| ** immediately-following link:-
| ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
| ** or send a message, to
| ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq
|
|
| --
| This email has been verified as Virus free.
| Virus Protection and more available at
http://www.plus.net
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 2932 (20080309) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
this message is clean
Checked by AVG. Version: 7.5.518 / Virus Database:
269.21.7/1319 - Release
Date: 08/03/2008 10:14
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
this message is clean
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release
Date: 08/03/2008
10:14
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
this message is clean
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release
Date: 08/03/2008
10:14
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
this message is clean
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 08/03/2008
10:14
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
