[access-uk] Re: problems tvonics

  • From: "Kulvinder Singh Bhogal" <kbhogal1@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 6 Oct 2013 14:39:51 +0100

Hi there

A couple of things to mention here and they are:

I would suggest uprating the PSU to a higher ampage as has been suggested on the Pulse Eight forum and secondly, replace the drive for a larger and faster drive.

I can recommend going to Mobeen Iqbal for the drive.

He has replaced mine and it wrks very well now.

When you replace the PSU, check that the polarity is correct.

I hope this helps.

Regards


--------------------------------------------------
From: "William Lomas" <w.d.lomas@xxxxxxxxxxxxxx>
Sent: Saturday, October 05, 2013 10:55 PM
To: <access-uk@xxxxxxxxxxxxx>
Subject: [access-uk] problems tvonics

hi to all i have the RNIB hd free view box from tonics
my question is the hard drive i believe has been mentioned before in relation to sluggish speech and freezes is their a solution?
regards Will
p.s. i hear someone could replace the hard drive for me to a much better make and therefore making the box run a lot smoother?
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: