[access-uk] Re: my first apple device

  • From: "Adrien Collins" <adriencollins22160@xxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 25 Jul 2014 10:18:32 +0200

Hi 

You are right, I didn't need another phone so I didn't get
the iphone. Twice the price in any case.

Regards

Adrien


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of eleanor martha
burke
Sent: Friday, July 25, 2014 10:03 AM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: my first apple device

@Understand its not a phone so the Sim card will not make it
work as the phone

Eleanor Martha Burke

> On 25 Jul 2014, at 09:00, john gallagher
<john@xxxxxxxxxxxxxxxxxxx> wrote:
> 
> hi there i thought the first thing you should do is to put
a sim in to it otherwise it will not work as a phone. 
> 
> ----- Original Message -----
> From: Ibrahim Gucukoglu <ibrahimGucukoglu@xxxxxxxx>
> To: access-uk@xxxxxxxxxxxxx
> Date: Friday, 25 July 2014 7.32 am
> Subject: [access-uk] Re: my first apple device
> 
>> 
>> 
>> Hi.
>> 
>> Siri wont be available until you complete the setup
process of your device, 
>> so using it is not an option I'm afraid, even for turning
on voice over. 
>> You must either use the triple click home method or
connect your device to a 
>> computer.
>> 
>> All the best, Ibrahim.
>> 
>> -----Original Message----- 
>> From: Adrien Collins
>> Sent: Thursday, July 24, 2014 8.03 PM
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: my first apple device
>> 
>> Hi Martin
>> 
>> Yes I have a good signal but no spare sim card, can I put
>> any sim card in it?
>> 
>> Regards
>> 
>> Adrien
>> 
>> 
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of martin
wilsher
>> Sent: Thursday, July 24, 2014 12.05 PM
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: my first apple device
>> 
>> If you have good mobile signal, you could, at a pinch,
use
>> siri to turn on
>> vo,
>> 
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
>> Ian Macrae
>> Sent: 24 July 2014 10.58
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: my first apple device
>> 
>> If the triple home click doesn't do the job and if you
have
>> no sight you
>> will require the assistance of someone who can see to
turn
>> VO on.  It's a
>> very easy thing for them to do and is done through
>> settings/accessibility.
>> Voiceover is the first toggle in that list.  Once it's
done
>> you should be
>> off and running.  As for the apps you'll need, that
really
>> depends on what
>> sort of information you're after and what you want to use
>> the device to do.
>> 
>>> On 24 Jul 2014, at 10.52, Eleanor Martha Burke wrote:
>>> 
>>> Yes I had to do that too.
>>> ----- Original Message -----
>>> From: "martin wilsher" <martinwilsher@xxxxxxxxxxxxxx>
>>> To: <access-uk@xxxxxxxxxxxxx>
>>> Sent: Thursday, July 24, 2014 10.27 AM
>>> Subject: [access-uk] Re: my first apple device
>> 0was Do you not have to set voiceover up to be triggered
by
>> the triple
>> 0was tap?  I had to.
>> 0was
>> 0was -----Original Message-----
>> 0was From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On
>> 0was Behalf Of Ibrahim Gucukoglu
>> 0was Sent: 24 July 2014 10.24
>> 0was To: access-uk@xxxxxxxxxxxxx
>> 0was Subject: [access-uk] Re: my first apple device
>> 0was
>> 0was Hi Adrian.
>> 0was
>> 0was When you get your device, turn it on by pressing the
>> power button for
>> 0was about two seconds, give it 30 seconds or so and then
>> press the home
>> 0was button rapidly three times to turn on voice over.
That's
>> all there
>> 0was is to it.  As for Skype, Drop box and the rest, you
can
>> download all
>> 0was those apps from the app store when you've set up
your
>> Apple ID.
>> 0was
>> 0was All the best and good luck, let us know if you have
>> specific
>> 0was questions you want answering, also www.applevis.com
is
>> probably one
>> 0was of the best websites for you now and in to the
future as
>> it contains
>> 0was a wealth of material including an app directory,
podcast
>> library,
>> 0was tutorials, reviews and a user forum.
>> 0was
>> 0was All the best, Ibrahim.
>> 0was
>> 0was -----Original Message-----
>> 0was From: Adrien Collins
>> 0was Sent: Thursday, July 24, 2014 8.34 AM
>> 0was To: 'access uk'
>> 0was Subject: [access-uk] my first apple device
>> 0was
>> 0was Hi
>> 0was
>> 0was Ok I have put the order in for my first I device, I
will
>> need some
>> 0was help with it, It is coming from amazon and they are
not
>> allowed to
>> 0was open it to activate voice over for me but I am sure
I can
>> get that
>> 0was sorted out quite easily.
>> 0was
>> 0was Now, I have a few questions, I have been assured by
>> amazon it is new,
>> 0was therefore should be a 5th generation device. I use
skype
>> as my phone
>> 0was plus a means to contact people so I am sure there
will be
>> ways for me
>> 0was to use skype, also facebook and I use dropbox to
share
>> files between
>> 0was devices. What other useful apps would I need once I
get
>> going? I have
>> 0was seen several people using I devices and some have
even
>> let me try it
>> 0was for myself and I think it'll be much easier for me
than
>> an android
>> 0was device, I have tried the hudl from tesco but
couldn't get
>> the hang of
>> 0was that. I have also ordered a keyboard and case, they
are
>> all coming in
>> 0was the same delivery.
>> 0was
>> 0was
>> 0was I know there are several groups for I devices, what
is
>> the best one
>> 0was for me to get help if I need it? It will take me a
while
>> to learn but
>> 0was I feel I need to do it now, otherwise I will
struggle
>> later on. Watch
>> 0was this space.
>> 0was Lastly,
>> 0was are there any useful tutorials? I know there is a
guide
>> system on the
>> 0was ipad so that is one of the main reasons I went for
it.
>> 0was
>> 0was Regards
>> 0was
>> 0was Adrien
>> 0was
>> 0was
>> 0was I use BullGuard to keep my computer clean.
>> 0was Try BullGuard for free: www.bullguard.com
>> 0was
>> 0was
>> 0was
>> 0was ** To leave the list, click on the
immediately-following
>> link:-
>> 0was **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> 0was ** If this link doesn't work then send a message to:
>> 0was ** access-uk-request@xxxxxxxxxxxxx
>> 0was ** and in the Subject line type
>> 0was ** unsubscribe
>> 0was ** For other list commands such as vacation mode,
click
>> on the
>> 0was ** immediately-following link:-
>> 0was **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> 0was ** or send a message, to
>> 0was ** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq
>> 0was
>> 0was ** To leave the list, click on the
immediately-following
>> link:-
>> 0was **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> 0was ** If this link doesn't work then send a message to:
>> 0was ** access-uk-request@xxxxxxxxxxxxx
>> 0was ** and in the Subject line type
>> 0was ** unsubscribe
>> 0was ** For other list commands such as vacation mode,
click
>> on the
>> 0was ** immediately-following link:-
>> 0was **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> 0was ** or send a message, to
>> 0was ** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq
>> 0was
>> 0was ** To leave the list, click on the
immediately-following
>> link:-
>> 0was **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> 0was ** If this link doesn't work then send a message to:
>> 0was ** access-uk-request@xxxxxxxxxxxxx
>> 0was ** and in the Subject line type
>> 0was ** unsubscribe
>> 0was ** For other list commands such as vacation mode,
click
>> on the
>> 0was ** immediately-following link:-
>> 0was **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> 0was ** or send a message, to
>> 0was ** access-uk-request@xxxxxxxxxxxxx with the
Subject:- faq
>> 0was
>> 0was
>>> 
>>> ** To leave the list, click on the immediately-following
>> link:-
>>> **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
on
>> the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
faq
>> 
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on
>> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>> 
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on
>> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>> I use BullGuard to keep my computer clean.
>> Try BullGuard for free: www.bullguard.com
>> 
>> 
>> 
>> ** To leave the list, click on the immediately-following
link:-
>> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>> 
>> ** To leave the list, click on the immediately-following
link:-
>> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
I use BullGuard to keep my computer clean.
Try BullGuard for free: www.bullguard.com



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: