hi adrien.it looks like all of your fans are either jammed or they're not connected properly so as to provide a fan status readout to the software. some fans are connected directly to the power supply so you have no idea when they fail initially. yes, it is a very good idea to get it fully checked out. dust build up could've caused the problem, though you'd have to be in an extremely dusty house for 4 fans to fail unless they were crap quality in the first place!
all the best, Mo. On 26/01/2015 20:13, Adrien Collins wrote:
Hi Mo Just to give you an up-date, it looks as if most of the fans in my desktop are not working, I have turned the pc off, Paul is coming on Monday to fix my pc, I have a spare cpu fan here plus he is bringing some fans, not sure what else could be causing the problems. See below. Sys Fan:0 RPM CPU Fan:1245 RPM Aux Fan:0 RPM Aux1 Fan:0 RPM Aux2 Fan:0 RPM System:34C CPU:90C AUX:57C SMIOVT4:34C SMIOVT5:34C SMIOVT6:34C HD1:31C HD0:36C Core 0:29C CPU: Regards Adrien -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Mobeen Iqbal Sent: Sunday, January 25, 2015 8:21 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: my desktop Hi Adrien. You could try HW Monitor. link is below. that seems to be fine regarding your CPU. if its just warm that's normal for any computer. is it an AMD? they always tend to get hotter... http://www.cpuid.com/softwares/hwmonitor.html cheers, Mo. On 25/01/2015 19:17, Adrien Collins wrote:Hi Mo I have copied this from my other pc via dropbox, the cpu temperature is fluctuating from 69 to 91 c, not sure which one you need. At present the top isn't too hot, just warm. Is there a better program than speedfan for monitoring the internal temperatures etc please. System:33C CPU:91C AUX:56C SMIOVT4:34C SMIOVT5:34C SMIOVT6:34C HD1:32C HD0:35C Core 0:34C CPU: Regards Adrien -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Mobeen Iqbal Sent: Sunday, January 25, 2015 7:48 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: my desktop hi adrien. what's the current temperature? ideally it should bebetween30 degrees C and 50 degrees C. i've always disliked norton utilities, so they're probably sucking up resources and making your PC runhotter.finally, is it an AMD by any chance? cheers, Mo. On 25/01/2015 17:35, Adrien Collins wrote:Hi I have a few questions regarding my desktop. I had a new power supply fitted to my desktop last year, I have just noticed this morning, after running the desktop for aperiodof time, perhaps a few hours, my desktop gets quite warmontop, the power supply was replaced last year because thefanin the old one seized up. I have checked the fans belowthepower supply, I think there are two fans below, they seemtobe putting out cold air although this morning they were putting out a lot of warm air, I have just checked theside,there is air coming out of the side vent too. At first I thought my cpu fan may be playing up but I am not quitesurehow I would know this. I had a few problems with my pc on Thursday, it wouldn't shut off or shut down, I rolled it back and this morning I installed norton utilities andfoundseveral errors, in fact several hundred and fixed them. I installed speed fan, the temperature of the cpu seems tobea bit high, again I am not sure what the temperatureshouldbe, I turned the pc off for the afternoon, let it coolrightdown but I put it back on at 4 pm, after 2 hours it is getting warm again. Is this normal? Should I beconcerned?There is some air coming out of the power supply itselfbutnot a lot. What should my cpu temperature be? I assumethatif anything serious went wrong my pc would shut off to protect itself? Also listening to it it sounds a bitnoisybut it could be vibration on my desk. I have it sittingonacarpet tile. The desktop is one I had built a few yearsagoin 2012, I use windows 7 pro on it. I may be worrying for nothing but I pick up on noises and this doesn't quitesoundright to me. Regards Adrien ** To leave the list, click on the immediately-followinglink:-**[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, clickonthe** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- **[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-followinglink:-**[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click onthe** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq