[access-uk] Re: gps on n86
- From: "Linda Gaitskell" <runningsun27@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 23 Jun 2010 22:50:15 +0100
Hi Ibrahim
still no progress so if you want to call me I would be greatful.
Thanks
Linda
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Wednesday, June 23, 2010 10:37 PM
Subject: [access-uk] Re: gps on n86
Hi Linda.
OK, uncheck bluetooth please, also make sure that all other boxes including
assisted and internal are ticked, you should also have one called network based
as well. Basicly you want everything except bluetooth ticked. Launch
wayfinder and go to the options menu in the main menu of the program, select
connect to gps if that option is available. You might have to wait a few
minutes for the gps to calibrate but either way, there should be information
about your gps position and reception in the gps tab of wayfinder.
All the best and if your still having trouble, I'll happily give you a ring.
----- Original Message -----
From: Linda Gaitskell
To: access-uk@xxxxxxxxxxxxx
Sent: Wednesday, June 23, 2010 10:18 PM
Subject: [access-uk] Re: gps on n86
Hi Ibrahim
in aplications, land marks, positioning methods I have the choice of
assisted,blue tooth or internal gps. At the moment I have internal gps
selected I have tried checking all three but still makes no difference.
Thanks
Linda
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Wednesday, June 23, 2010 10:02 PM
Subject: [access-uk] Re: gps on n86
Hi Linda.
Is the internal gps receiver enabled on your phone?
All the best, Ibrahim.
----- Original Message -----
From: Linda Gaitskell
To: access-uk@xxxxxxxxxxxxx
Sent: Wednesday, June 23, 2010 9:54 PM
Subject: [access-uk] gps on n86
HiAll
using wayfinder on n86 I cant seem to get it to connect to the internal
gps. when I have put in the address of where I want to go to and select
search it comes back with the message saying "no positions from the gps are
received". In aplications, land marks, positioning methods I have use internal
gps selected. So where am I going wrong please?
Thanks
Linda
Other related posts:
