Hi Linda, That was a bit of a curt response. What part is not correct? OK, let me look from my phone, I did it from memory. Tools, Settings, General, Positioning, Positioning Methods. And that is correct. All the best Steve All the best Steve From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Linda Gaitskell Sent: Friday 25 June 2010 22:19 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: gps on n86 Hi Steve thanks but your instructions arent correct. Linda ----- Original Message ----- From: Steve Nutt <mailto:steve@xxxxxxxxxxxxxx> To: access-uk@xxxxxxxxxxxxx Sent: Thursday, June 24, 2010 11:06 PM Subject: [access-uk] Re: gps on n86 Linda, Toos, Settings, Positioning, Positioning Methods, then tick the box that says Internal GPS. All the best Steve From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Linda Gaitskell Sent: Wednesday 23 June 2010 22:08 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: gps on n86 HiMike I cant seem to find the option to turn on gps anywhere in the phone. I have searched and searched. thanks Linda ----- Original Message ----- From: Mike Moore <mailto:mikeis@xxxxxxxxxxxx> To: access-uk@xxxxxxxxxxxxx Sent: Wednesday, June 23, 2010 10:00 PM Subject: [access-uk] Re: gps on n86 Linda, Not sure if it is the same problem or not, but I am using Loadstone on my Nokia 6210 Navigator and you need to turn on GPS Data first to get it to "find" the internal GPS. Hope this is of help. Regards, Mike ----- Original Message ----- From: Linda Gaitskell <mailto:runningsun27@xxxxxxxxxxxxxx> To: access-uk@xxxxxxxxxxxxx Sent: Wednesday, June 23, 2010 9:54 PM Subject: [access-uk] gps on n86 HiAll using wayfinder on n86 I cant seem to get it to connect to the internal gps. when I have put in the address of where I want to go to and select search it comes back with the message saying "no positions from the gps are received". In aplications, land marks, positioning methods I have use internal gps selected. So where am I going wrong please? Thanks Linda