[access-uk] Re: formatting internal memory on the Stream

  • From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Thu, 2 Oct 2014 17:07:55 +0100

Hi,

I bet the authorisation is not stored on the SD card.  This would mean you
couldn't swap cards.

All the best

Steve

--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Yusuf Osman
Sent: 30 September 2014 09:43
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: formatting internal memory on the Stream

Hi Clive, You need to hold down keys 2, 6 and 8 whilst turning the Stream
on. You will then be placed in a menue and if you use 8 or 2 to move through
it, one of the options will be to format the internal memory. You'll lose
any podcasts, radio stations, saved encyclopedia articles and bookmarks, but
the firmware will be fine. The SD card won't be effected and so I don't
think Audible should be effected either as the authorisation file is stored
on the SD card.
Yusuf

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Clive Pallett
Sent: 29 September 2014 22:49
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] formatting internal memory on the Stream

Hello Steve and fellow listers,

I have just checked in the Stream's menus and there isn't an option to
format the internal memory, just the SD card.  How is this done if needed?

best wishes,

Clive Pallett

 
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: