[access-uk] Re: error explanation needed
- From: "kevin and emma" <kream@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 29 Jul 2004 15:23:54 +0100
hi george, thanks for this. it really annoys me when you ring your ISP and
they say they can't find anything. yet you ring back 20 minutes later and
they look into it again and .. bingo!! problem solved.
email or msn
kream@xxxxxxxxxxxx
cheers - kevin
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, July 29, 2004 2:58 PM
Subject: [access-uk] Re: error explanation needed
Basically it seems you were allocated an IP
address as stated, and for some reason or another,
the appropriate look up Server was unable to find
it. The address is listed as belonging to
PlusNet, which makes it all the more surprising
that they could not have explained this to you.
George.
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
kevin and emma
> Sent: 29 July 2004 14:37
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] error explanation needed
>
> hi, i had a problem over night with my adsl. i
had none!
> neither BT or my ISP (plus.net) at the time
could find a
> problem. and my broadband just reappeared during
this
> morning. the last note on my queery with
plus.net reads as
> follows and is the reason for the problem. can
someone
> explain it to me?
>
> static IP (reason unreported) 81.174.243.163
unknown withheld 11:32
> 29/Jul/2004 N/A 1:46:3 (on going)
> email or msn
> kream@xxxxxxxxxxxx
> cheers - kevin
-- No attachments (even text) are allowed --
-- Type: application/ms-tnef
-- File: winmail.dat
** Going on holiday and want to halt messages? Send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** vacation ## d
** where ## is the number of days followed by d for days.
** For other things like digest mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** Going on holiday and want to halt messages? Send a message to:-
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** vacation ## d
** where ## is the number of days followed by d for days.
** For other things like digest mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
