[access-uk] Re: display

  • From: George Bell <george@xxxxxxxxxxxxxxxxxxx>
  • To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
  • Date: Mon, 29 Dec 2014 17:09:21 +0000

Hi Ali, So how are you connecting the monitor to it at the moment then?

George

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: 29 December 2014 16:23
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Hi George, I believe it is 2006 or 2007 white Imac version. 



Thank you

Ali


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
George Bell
Sent: 29 December 2014 14:13
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Hi Ali,

What model of Mac is it?  I have a Mac Mini and there are a special adaptor 
cables which allow you to connect a regular monitor.  I can't quite see you 
easily getting a USB, FireWire or Bluetooth monitor.

George

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: 29 December 2014 12:58
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Steve,
It looks like the physical  screen is gone as I do not have anything displayed 
on the Mac side either.  I have reinstalled all the drivers no luck, it is 
still grey.  Unfortunately I do not have much connection option for this Mac 
for an external monitor.  It will either has to be USB, wirefire or a Bluetooth 
monitor.



Thank you

Ali


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
Steve Nutt
Sent: 29 December 2014 11:36
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Hi,

I wonder if the physical screen is damaged?  Could you plug an external monitor 
into it and see what happens?

All the best

Steve

--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: 28 December 2014 21:41
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Hi,
Both display adaptor and the monitor indicate that they are functioning fine, 
but, for some reason, I am not getting anything on the screen.



Thank you

Ali


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
Amro Bilal
Sent: 28 December 2014 21:14
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

I'd start by checking Device Manager/Display Adapters. It probably wouldn't 
tell you anything useful in my experience, but worth checking never the less.

Amro

-----Original Message-----
From: Ali
Sent: Sunday, December 28, 2014 7:11 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Hi,
It is all integrated as it is all in one computer.



Thank you

Ali


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
martin wilsher
Sent: 28 December 2014 19:09
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display

Have u checked the cables?  The plug might have come loose from Your graphics 
card.

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: 28 December 2014 19:02
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] display

Hi all,
Does anyone know how I can check if my video and graphic cards are functioning 
properly?  Apparently I do not have anything on my screen and it is dark grey.  
I asked my son to have a look at it when I re-start the system, he says it only 
changes from black to dark grey nothing displayed and at the moment it is dark 
grey nothing displayed.

I am using windows 7 on an Imac computer with jaws 13 pro.

Note
Display is adjusted not to turn off, and all the other settings are recommended 
settings, jaws and voiceover are functioning without any problems.

Thank you

Ali


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
Steve Nutt
Sent: 28 December 2014 17:37
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: WindowEyes.

Hi Colin,

Well it depends on which screen reader you want to log on at startup.  In JAWS 
it is in Basic Options and in Window-Eyes, it is in General.  If you want 
neither to start up, then you need to turn Log On at Startup off on both screen 
readers.

All teh best

Steve

--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of 
Colin Howard
Sent: 27 December 2014 11:33
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] WindowEyes.

Greetings,

I have just taken deliverey of a new W7 system with JawsV14 and windowEyes 
V8.whatever, it still needs a lot more tweaking.

One problem is, both launch at startup and W.E is in demo mode, Jaws is alright.

I knew on my old system somewhere, no longer working but files saved to new 
one, I had a document from ages ago sent to AccessUK about how to stop this 
happening but the date of the post is 2001, hence, in the early days of 
WindowsXP.

I paste in the document below, so please can somebody tell me how to stop this 
happening under W7 Premium 64? Please, I am very novvice with W7 so please keep 
it very simple.

To: access-uk@xxxxxxxxxxxxxxx
Subject: Re: (Access-UK) -  MAKING WINDOW EYES NOT START BY DEFAULT
From: Bill Herzler <billh@xxxxxxxxxxx>
Date: Wed, 01 Aug 2001 12:35:08 -0500
Cc: aaron@xxxxxxxxxxx,mike@xxxxxxxxxxx,dan@xxxxxxxxxxx

Richard,

If Window-Eyes is in the startup group you need to remove it.  Do the 
following.  1. bring up the start menu with control-escape.  2. type "p"
for programs.  3. Arrow down to startup and hit enter.  4. Arrow down to 
Window-Eyes and do shift-f10.  5.  Arrow down to delete and hit enter.
Answer yes.

If you are using load before Startup bring up the Window-Eyes control panel 
control-backslash, alt-f for file and arrow to load before startup.  If this is 
on hit enter to turn it off.

I hope this helps.  If you have problems write me at billh@xxxxxxxxxxx

Regards, Bill

At 03:32 PM 8/1/01 +0100, you wrote:
>Can someone please tell me, for a friend, how one stops Window Eyes
starting
>up automatically.  As I am not a WE user, detailed instructions would 
>be appreciated.
>Richard Godfrey
>Telephone: +44(0)1656-657516
>Can't get through? try
>Mobile: 07890-782659
>
>
>
>To unsubscribe from this list, send a blank message with no subject 
>heading or text in the body to
>
>access-uk-unsubscribe@xxxxxxxxxxxxx
>
>
>
>Your use of Yahoo! Groups is subject to 
>http://docs.yahoo.com/info/terms/

Bill Herzler
Technical Support Specialist
Voice 219-489-3671
Fax 219-489-2608
E-mail billh@xxxxxxxxxxx
Web http://www.gwmicro.com
Ftp ftp://ftp.gwmicro.com


------------------------ Yahoo! Groups Sponsor ---------------------~--> Small 
business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA/ySSFAA/dpFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this list, send a blank message with no subject heading or 
text in the body to

access-uk-unsubscribe@xxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: