[access-uk] Re: display
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Mon, 29 Dec 2014 11:33:43 -0000
Hi,
Unlikely, since the display wouldn't change from black to grey, it simply
wouldn't work. If the cable wasn't plugged in, most of them now would say
no input signal. COuld be a display driver issue though.
All the best
Steve
--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
martin wilsher
Sent: 28 December 2014 19:09
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: display
Have u checked the cables? The plug might have come loose from Your
graphics card.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ali
Sent: 28 December 2014 19:02
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] display
Hi all,
Does anyone know how I can check if my video and graphic cards are
functioning properly? Apparently I do not have anything on my screen and it
is dark grey. I asked my son to have a look at it when I re-start the
system, he says it only changes from black to dark grey nothing displayed
and at the moment it is dark grey nothing displayed.
I am using windows 7 on an Imac computer with jaws 13 pro.
Note
Display is adjusted not to turn off, and all the other settings are
recommended settings, jaws and voiceover are functioning without any
problems.
Thank you
Ali
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Steve Nutt
Sent: 28 December 2014 17:37
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: WindowEyes.
Hi Colin,
Well it depends on which screen reader you want to log on at startup. In
JAWS it is in Basic Options and in Window-Eyes, it is in General. If you
want neither to start up, then you need to turn Log On at Startup off on
both screen readers.
All teh best
Steve
--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Colin Howard
Sent: 27 December 2014 11:33
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] WindowEyes.
Greetings,
I have just taken deliverey of a new W7 system with JawsV14 and windowEyes
V8.whatever, it still needs a lot more tweaking.
One problem is, both launch at startup and W.E is in demo mode, Jaws is
alright.
I knew on my old system somewhere, no longer working but files saved to new
one, I had a document from ages ago sent to AccessUK about how to stop this
happening but the date of the post is 2001, hence, in the early days of
WindowsXP.
I paste in the document below, so please can somebody tell me how to stop
this happening under W7 Premium 64? Please, I am very novvice with W7 so
please keep it very simple.
To: access-uk@xxxxxxxxxxxxxxx
Subject: Re: (Access-UK) - MAKING WINDOW EYES NOT START BY DEFAULT
From: Bill Herzler <billh@xxxxxxxxxxx>
Date: Wed, 01 Aug 2001 12:35:08 -0500
Cc: aaron@xxxxxxxxxxx,mike@xxxxxxxxxxx,dan@xxxxxxxxxxx
Richard,
If Window-Eyes is in the startup group you need to remove it. Do the
following. 1. bring up the start menu with control-escape. 2. type "p"
for programs. 3. Arrow down to startup and hit enter. 4. Arrow down to
Window-Eyes and do shift-f10. 5. Arrow down to delete and hit enter.
Answer yes.
If you are using load before Startup bring up the Window-Eyes control panel
control-backslash, alt-f for file and arrow to load before startup. If this
is on hit enter to turn it off.
I hope this helps. If you have problems write me at billh@xxxxxxxxxxx
Regards, Bill
At 03:32 PM 8/1/01 +0100, you wrote:
>Can someone please tell me, for a friend, how one stops Window Eyes
starting
>up automatically. As I am not a WE user, detailed instructions would
>be appreciated.
>Richard Godfrey
>Telephone: +44(0)1656-657516
>Can't get through? try
>Mobile: 07890-782659
>
>
>
>To unsubscribe from this list, send a blank message with no subject
>heading or text in the body to
>
>access-uk-unsubscribe@xxxxxxxxxxxxx
>
>
>
>Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
Bill Herzler
Technical Support Specialist
Voice 219-489-3671
Fax 219-489-2608
E-mail billh@xxxxxxxxxxx
Web http://www.gwmicro.com
Ftp ftp://ftp.gwmicro.com
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Small business owners...
Tell us what you think!
http://us.click.yahoo.com/vO1FAB/txzCAA/ySSFAA/dpFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this list, send a blank message with no subject heading
or text in the body to
access-uk-unsubscribe@xxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
