[access-uk] Re: computer housekeeping
- From: "Adrien Collins" <adriencollins06@xxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 8 Aug 2007 09:18:43 +0200
Hi
Disk keeper works with all my drives, you just select the drive that you
want to defrag.
Regards
Adrien
You can get me off list at
adriencollins06@xxxxxxx
Speakon is a free fully self-voicing accessible multimedia
program for
the visually impaired, find out more by downloading the
software from:
http://www.a-technic.net/speakon.htm
You can join the speakon user group by sending a blank
e-mail to:
speakon-subscribe@xxxxxxxxxxxxxxx
----- Original Message -----
From: "Alexander Shannon" <alexacts2v4@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, August 07, 2007 9:19 PM
Subject: [access-uk] Re: computer housekeeping
Hi all,
I have been following this thread with some interest, and was thinking of
trying out disk keeper on my Acer laptop running windows XP, on which I am
running Supernova as my screen reading and magnification tool, however,
until reading Adrien's message to which I am replying, I was reluctant to
try disk keeper, as I was not sure if it would work with the speech of
Supernova, which is the same as Hal, but after Adrien's message, I am
tempted to try and download the trial of disk keeper to run on this
machine, but I have one or two questions.
How would it run on a machine with a split hard drive? would I have to
download it once for each drive, as I have set the computer up so that one
drive(the C drive), has the programs on it, and the D drive has the data
on it.
If anyone can give me some advice, or answer the above questions I would
appreciate it.
Thank you all in advance.
Alexander Shannon
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
