[access-uk] Re: computer housekeeping
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 7 Aug 2007 21:45:59 +0100
Hi Alex,
Unless you tell Diskeeper otherwise, it will scan all drives, so you only
need one copy. And you'll never know if it works, unless you try it.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Alexander Shannon
Sent: 07 August 2007 20:19
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: computer housekeeping
Hi all,
I have been following this thread with some interest, and was thinking of
trying out disk keeper on my Acer laptop running windows XP, on which I am
running Supernova as my screen reading and magnification tool, however,
until reading Adrien's message to which I am replying, I was reluctant to
try disk keeper, as I was not sure if it would work with the speech of
Supernova, which is the same as Hal, but after Adrien's message, I am
tempted to try and download the trial of disk keeper to run on this machine,
but I have one or two questions.
How would it run on a machine with a split hard drive? would I have to
download it once for each drive, as I have set the computer up so that one
drive(the C drive), has the programs on it, and the D drive has the data on
it.
If anyone can give me some advice, or answer the above questions I would
appreciate it.
Thank you all in advance.
Alexander Shannon
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
