Mark, I already have such a cable. I now need some kinda plug system, that will let me connect the stereo plug from the speakers, to the 2 phone sockets on the cable box,
Billy----- Original Message ----- From: "Mark Threadgold" <m.j.threadgold@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, August 02, 2007 10:45 PM Subject: [access-uk] Re: adding speakers?
Billy, You should be able to get a SCART splitter cable. This has a scart leadconnector on one end and a set of audio and video phono plugs on the other.Take the phono outputs and connect them to the input of an amplified speakersystem.Some of the PC speakers may not perform well with this as the level of audio output from the scart socket is lower than that of a PC sound card. You mayhave to run it through a proper stereo type amplifier, but the PC speakers may well be good enough for your needs. Hth, Mark Threadgold The probability of being watched is directly proportional to the stupidity of your act... -----Original Message-----From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf OfTrueBlue & Proud Sent: 02 August 2007 20:08 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: adding speakers?Ray, I apologise, if this question has been asked before on list, but if ithas I didn't see the post.It's not the speakers I'm Interested in, but how to connect such speakers tothe cable box, Billy----- Original Message ----- From: "Ray's Home" <rays-home@xxxxxxxxxxxxxxxxxx>To: <access-uk@xxxxxxxxxxxxx> Sent: Thursday, August 02, 2007 3:42 PM Subject: [access-uk] Re: adding speakers?Is Freelists having a touch of the lurgy or something? Sure I've seen this message before. Anyhow Billy, I think what you want are some powered speakers. Active, Powered, or battery powered, would be your probable key words in any search for such speakers. there are quite a few around from not very good quality to pretty respectable. From Ray I can be contacted off-list at: mailto:ray-48@xxxxxxxx -----Original Message----- TrueBlue & Proud hi guys, I'm wanting to add a pair of external stereo speakers to my virgin media cable box, Don't want to connect the box to my pc, just want to be able to listen to the cable box through a pair of stereo speakers. I'm sure there is someway to achieve this. Any Ideas please, Billy ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq __________ NOD32 2432 (20070802) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq __________ NOD32 2434 (20070802) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq