[access-uk] Re: XP Repair
- From: "Mark Matthews" <mark.matthews53@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 11 Dec 2005 21:41:20 -0000
Yes that's right. The usualBoot sequence is CD, Floppy, then HD...although
I've actually taken the Floppy drive out of the equation on my system.
Cheers,
Mark
Mark Matthews
Cardiff, Wales, UK
E-mail/MSN/Windows Messenger: mark.matthews53@xxxxxxxxxxxx
Skype: MMatthews1981
Mobile: 07779 147874
Home Page: http://www.qsl.net/gw0wgk/
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Chipmunks
Sent: 11 December 2005 19:16
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: XP Repair
Actually, I can't. I do not have XP myself but only 2k and therefore
am no expert on what is and is not possible with xp.
I thought you had problems getting the repair option to come up, i.e.
that your machine performed a regular reboot and dit not access the
cd but booted from your hard drive. I was therefore wondering if your
machine's bios is actulaly set to boot from cd. Thhis means the cd
drive would need to come before the hd in the boot sequence. You do
need sighted assistence to have your bios set to boot from cd.
I said I was not sure if you would have speech at the point the
repair option comes up when it does come up. This is for xp users to
answer and not myself.
Sorry for any confusion i might have caused here.
Cheers,
Doris
At 05:03 PM 12/11/2005 +0000, you wrote:
>I think I'm misunderstanding something here. I thought if I put the
>XP disc into the machine and rebooted the screen automatically came
>up that asked me to install or repair.
>
>By saying I need sighted help you're implying I have to do something
>during the reboot process. Could you explain further please.
>
>Roger
>
>
>There are more old drunkards than old doctors.
>
>----- Original Message ----- From: "Chipmunks" <chipmunks@xxxxxxx>
>To: <access-uk@xxxxxxxxxxxxx>
>Sent: Sunday, December 11, 2005 3:57 PM
>Subject: [access-uk] Re: XP Repair
>
>
>>You might need to get sighted assistance to boot off of the cd. I
>>am not sure if you'd get narrator to run at this point to talk you
>>thru the repair or if you needed sighted assistance for the process.
>>
>>Cheers,
>>
>>Doris At 12:20 PM 12/11/2005 +0000, you wrote:
>>
>>>I have followed these instructions and the CD will not prompt me
>>>to start installation. I have been without Autostart on CD's for
>>>some little while now and possibly this is why the CD is not
>>>recognised and doing the below is just another normal restart to my
machine.
>>>
>>>Is there any other way I can access the repair facility of the XP
>>>disc? This is a legit commercial product and not a pirate. It has
>>>been activated by MS and all critical updates installed upto date
>>>including SP2.
>>>
>>>Roger
>>>
>>>
>>>There are more old drunkards than old doctors.
>>>
>>>----- Original Message ----- From: "George Bell"
>>><george@xxxxxxxxxxxxxxxxxxx>
>>>To: <access-uk@xxxxxxxxxxxxx>
>>>Sent: Wednesday, December 07, 2005 11:01 AM
>>>Subject: [access-uk] Re: XP Repair
>>>
>>>
>>>>Hi Roger,
>>>>
>>>>Having booted from the CD, if you keep going though the process, it
>>>>should eventually tell you that it has found an existing Operating
>>>>System, and prompt you to install a completely new one, or overwrite
>>>>(Repair) the existing one.
>>>>
>>>>George.
>>>>
>>>>>-----Original Message-----
>>>>>From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
>>>>>Behalf Of roger south
>>>>>Sent: 07 December 2005 10:46
>>>>>To: access-uk@xxxxxxxxxxxxx
>>>>>Subject: [access-uk] XP Repair
>>>>>
>>>>>Hi All
>>>>>
>>>>>I'm having a little trouble with Nero 7 Premium. The web site
>>>>>forum said to run a repair on Windows XP Home. I've loaded the XP
>>>>>disc and rebooted but can't get that
>>>>facility
>>>>>up. Could someone tell me how please.
>>>>>
>>>>>Many thanks
>>>>>
>>>>>Roger
>>>>>
>>>>>
>>>>>There are more old drunkards than old doctors.
>>>>>
>>>>>** To leave the list, click on the immediately-following
>>>>link:-
>>>>>**
>>>>[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>** If this link doesn't work then send a message to:
>>>>>** access-uk-request@xxxxxxxxxxxxx
>>>>>** and in the Subject line type
>>>>>** unsubscribe
>>>>>** For other list commands such as vacation mode, click on
>>>>the
>>>>>** immediately-following link:-
>>>>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>>** or send a message, to
>>>>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>** To leave the list, click on the immediately-following link:-
>>>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>** If this link doesn't work then send a message to:
>>>>** access-uk-request@xxxxxxxxxxxxx
>>>>** and in the Subject line type
>>>>** unsubscribe
>>>>** For other list commands such as vacation mode, click on the
>>>>** immediately-following link:-
>>>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>** or send a message, to
>>>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>** To leave the list, click on the immediately-following link:-
>>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>** If this link doesn't work then send a message to:
>>>** access-uk-request@xxxxxxxxxxxxx
>>>** and in the Subject line type
>>>** unsubscribe
>>>** For other list commands such as vacation mode, click on the
>>>** immediately-following link:-
>>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>** or send a message, to
>>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>>
>>>
>>>--
>>>No virus found in this incoming message.
>>>Checked by AVG Free Edition.
>>>Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date:
>>>12/9/2005
>>>
>>>
>>>
>>>
>>>--
>>>No virus found in this incoming message.
>>>Checked by AVG Anti-Virus.
>>>Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date:
>>>12/9/2005
>>
>>** To leave the list, click on the immediately-following link:-
>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>** If this link doesn't work then send a message to:
>>** access-uk-request@xxxxxxxxxxxxx
>>** and in the Subject line type
>>** unsubscribe
>>** For other list commands such as vacation mode, click on the
>>** immediately-following link:-
>>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>** or send a message, to
>>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date:
>12/9/2005
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date:
>12/9/2005
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
