Hi Frank,
Here is one thought for you.
1. Boot up.
2. Press enter to bypass the error, so that Window-Eyes loads.
3. Now you have Window-Eyes loaded, take it out of Load Before Startup, so
that it doesn't load at all.
4. Now reboot the machine.
5. When you hear the hard disk stop chuntering as I call it, then instead
of hitting enter, hit control-alt-W to load Window-eyes.
If you are lucky, Window-Eyes may come in and read out the error message.
Just a thought.
All the best
--
Computer Room Services: the long cane for blind computer users.
Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589
mobile: +44(0)7956 334938,
Email: Steve@xxxxxxxxxxxxxx
Web site: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Frank Haslam
Sent: 17 June 2005 07:17
To: Access-UK Mailing List
Subject: [access-uk] Windows 98 SE Won't Run Automatically
Hi, Listers!
When I boot up my Windows 98 PC with the latest version of Window-Eyes,
Windows doesn't run automatically and I have to press the Enter Key after a
few minutes.
Any ideas how to rectify this. It started a week or so ago for no apparent
reason.
Thanks for your help.
--
Frank - blind as a bat and proud of it too.
frank.haslam1@xxxxxxxxxxxx
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.7/20 - Release Date: 16/06/05
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.8/22 - Release Date: 17/06/05
