[access-uk] Re: Vigor 2500 question

  • From: "Tim Crawford" <tim@xxxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Tue, 8 Nov 2005 18:29:09 -0000

Hi Andrew,

Well I re-set the unit, and that did the trick.  I was able to enter my 
connection details and get online.  Wonder would you know how I'd go about 
updating the firmware?

Thanks for all the help, it's much appreciated.

Cheers,

Tim.


Tim, Bangor, N. Ireland

Msn:  gi4oph@xxxxxxxxxxx
Skype:  white_freightliner

Music trading page
http://www.gi4oph.plus.com/index.html

  ----- Original Message ----- 
  From: Andrew Hodgson 
  To: access-uk@xxxxxxxxxxxxx 
  Sent: Tuesday, November 08, 2005 4:07 PM
  Subject: [access-uk] Re: Vigor 2500 question


  Hi,

  That isn't brand new.  As I say you need to reset it this way and if it is 
that old you should really check and update the firmware in it.

  Andrew.


  -----Original Message-----
  From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
  Sent: Tue 08/11/2005 15:34
  To: access-uk@xxxxxxxxxxxxx
  Subject: [access-uk] Re: Vigor 2500 question
   
  OK Andrew, will try that.  I baught the router via Ebay about a year ago.  
The item was advertised as brand new, but you never know.

  Thanks,

  Tim.


  Tim, Bangor, N. Ireland

  Msn:  gi4oph@xxxxxxxxxxx
  Skype:  white_freightliner

  Music trading page
  http://www.gi4oph.plus.com/index.html

    ----- Original Message ----- 
    From: Andrew Hodgson 
    To: access-uk@xxxxxxxxxxxxx 
    Sent: Tuesday, November 08, 2005 3:07 PM
    Subject: [access-uk] Re: Vigor 2500 question


    Hi,

    I think someone may have used this before.  On the router there is a reset 
button which will need pushing by a paper clip.  Please reset the router and 
report back on the IP address returned through ipconfig.  If the IP address has 
changed from the default then I think the password may have been changed also.  
I am trying to get a definitive answer as to the specs on this model as I 
haven't used one, but that IP address doesn't look standard to me.

    Andrew.


    -----Original Message-----
    From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
    Sent: Tue 08/11/2005 14:57
    To: access-uk@xxxxxxxxxxxxx
    Subject: [access-uk] Re: Vigor 2500 question
     
    Andrew,

    With the 2500 connected, ipconfig returns the following.

    ip address:  10.210.210
    subnet mask:  255.255.255.0
    default gateway:  10.210.210.253

    When I run the quickstart wizard for the 2500 the ip address returned is 
also 10.210.210.253

    Thanks,

    Tim.



    Tim, Bangor, N. Ireland

    Msn:  gi4oph@xxxxxxxxxxx
    Skype:  white_freightliner


      ----- Original Message ----- 
      From: Andrew Hodgson 
      To: access-uk@xxxxxxxxxxxxx 
      Sent: Tuesday, November 08, 2005 8:32 AM
      Subject: [access-uk] Re: Vigor 2500 question


      Hi,

      Can you do an ipconfig at the command prompt and get back to me with your 
current IP address and the default gateway?  The 2500 is a cut down version of 
the 2600, and i am not sure whether it uses different software.

      Andrew.


      -----Original Message-----
      From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
      Sent: Mon 07/11/2005 18:26
      To: access-uk@xxxxxxxxxxxxx
      Subject: [access-uk] Re: Vigor 2500 question
       
      Andrew,

      The ip address displayed when I run the set-up wizard is different from 
this one.  Again, I don't see any way to change this.

      Thanks,

      Tim.



      Tim, Bangor, N. Ireland

      Msn:  gi4oph@xxxxxxxxxxx
      Skype:  white_freightliner

      Music trading page
      http://www.gi4oph.plus.com/index.html

        ----- Original Message ----- 
        From: Andrew Hodgson 
        To: access-uk@xxxxxxxxxxxxx 
        Sent: Monday, November 07, 2005 5:11 PM
        Subject: [access-uk] Re: Vigor 2500 question


        Hi,

        By default the router is on the following:

        Ip: 192.168.1.1
        user: admin
        Password: [blank]

        Andrew.


        -----Original Message-----
        From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
        Sent: Mon 07/11/2005 16:15
        To: access-uk@xxxxxxxxxxxxx
        Subject: [access-uk] Vigor 2500 question
         
        Hi!

        I've been trying to set-up a Draytek Vigor2500 modem/router.  When I 
run the "quick start wizard" on the supplied disc, a screen appears with an ip 
address and a prompt to enter a password.  Having read through the user guide, 
and had someone look at the written info, there's no obvious indication of what 
this password should be.

        Any help would be apreciated as I must be missing something here!

        Thanks,

        Tim.



        --
        This email has been verified as Virus free
        Virus Protection and more available at http://www.plus.net


      --
      This email has been verified as Virus free
      Virus Protection and more available at http://www.plus.net


    --
    This email has been verified as Virus free
    Virus Protection and more available at http://www.plus.net


  --
  This email has been verified as Virus free
  Virus Protection and more available at http://www.plus.net

Other related posts: