[access-uk] Re: Vigor 2500 question
- From: "Andrew Hodgson" <andrew@xxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 8 Nov 2005 16:07:15 -0000
Hi,
That isn't brand new. As I say you need to reset it this way and if it is that
old you should really check and update the firmware in it.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
Sent: Tue 08/11/2005 15:34
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Vigor 2500 question
OK Andrew, will try that. I baught the router via Ebay about a year ago. The
item was advertised as brand new, but you never know.
Thanks,
Tim.
Tim, Bangor, N. Ireland
Msn: gi4oph@xxxxxxxxxxx
Skype: white_freightliner
Music trading page
http://www.gi4oph.plus.com/index.html
----- Original Message -----
From: Andrew Hodgson
To: access-uk@xxxxxxxxxxxxx
Sent: Tuesday, November 08, 2005 3:07 PM
Subject: [access-uk] Re: Vigor 2500 question
Hi,
I think someone may have used this before. On the router there is a reset
button which will need pushing by a paper clip. Please reset the router and
report back on the IP address returned through ipconfig. If the IP address has
changed from the default then I think the password may have been changed also.
I am trying to get a definitive answer as to the specs on this model as I
haven't used one, but that IP address doesn't look standard to me.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
Sent: Tue 08/11/2005 14:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Vigor 2500 question
Andrew,
With the 2500 connected, ipconfig returns the following.
ip address: 10.210.210
subnet mask: 255.255.255.0
default gateway: 10.210.210.253
When I run the quickstart wizard for the 2500 the ip address returned is also
10.210.210.253
Thanks,
Tim.
Tim, Bangor, N. Ireland
Msn: gi4oph@xxxxxxxxxxx
Skype: white_freightliner
----- Original Message -----
From: Andrew Hodgson
To: access-uk@xxxxxxxxxxxxx
Sent: Tuesday, November 08, 2005 8:32 AM
Subject: [access-uk] Re: Vigor 2500 question
Hi,
Can you do an ipconfig at the command prompt and get back to me with your
current IP address and the default gateway? The 2500 is a cut down version of
the 2600, and i am not sure whether it uses different software.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
Sent: Mon 07/11/2005 18:26
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Vigor 2500 question
Andrew,
The ip address displayed when I run the set-up wizard is different from
this one. Again, I don't see any way to change this.
Thanks,
Tim.
Tim, Bangor, N. Ireland
Msn: gi4oph@xxxxxxxxxxx
Skype: white_freightliner
Music trading page
http://www.gi4oph.plus.com/index.html
----- Original Message -----
From: Andrew Hodgson
To: access-uk@xxxxxxxxxxxxx
Sent: Monday, November 07, 2005 5:11 PM
Subject: [access-uk] Re: Vigor 2500 question
Hi,
By default the router is on the following:
Ip: 192.168.1.1
user: admin
Password: [blank]
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx on behalf of Tim Crawford
Sent: Mon 07/11/2005 16:15
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Vigor 2500 question
Hi!
I've been trying to set-up a Draytek Vigor2500 modem/router. When I run
the "quick start wizard" on the supplied disc, a screen appears with an ip
address and a prompt to enter a password. Having read through the user guide,
and had someone look at the written info, there's no obvious indication of what
this password should be.
Any help would be apreciated as I must be missing something here!
Thanks,
Tim.
--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net
--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net
--
This email has been verified as Virus free
Virus Protection and more available at http://www.plus.net
Other related posts: