Thanks. Did not notice that before. David -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of john coley Sent: 15 May 2012 10:38 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Using SCART connectors on various devices The blue and yellow buttons on the bottom row of the remote move you forward and backward respectively when in the EPG. John. ----- Original Message ----- From: "David Russell" <david.russell8@xxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Tuesday, May 15, 2012 10:12 AM Subject: [access-uk] Re: Using SCART connectors on various devices > Jackie > > I have found that using the right arrow with EPG does usually repeat the > announcement, so it needs to be pressed twice. I wonder if there is a way > of moving through the EPG more quickly, say to the evening or the next > day? > > My way of getting around the various key combinations between my Virgin > box > and the T-Vonics is to turn the T-Vonics to stand by when it is not being > used. When I do this, the Virgin box plays without pressing any further > buttons. > There is usually a way around such things. > > > David > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf > Of > Jackie Cairns > Sent: 15 May 2012 09:58 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Using SCART connectors on various devices > > I can now report that the chaps who set up our TVonics box came back > yesterday with a SCART lead. We now have a system whereby both our > standard > Sky DigiBox and the TVonics unit are connected to the TV via SCART. When > we > turn on the TV, the built-in Freeview comes on by default. If we then > turn > on either the Sky or TVonics devices, they will jump from one to the > other, > depending on which one we want to use. > > Our only concern is that the latest SCART leads are rather heavy, and the > one when connected to the TVonics box looks rather precarious. If they > had > screws like the old Parallel cables where you could put them in and > tighten > them up, it would cause less strain on the pins. > > However, that's the best and easiest method for us. Using one device on > HDMI and another on SCART is a real faff! > > Recording programmes and deleting them is easy, and looking through the > EPG > is also very helpful. Yes it does stick when you right arrow, but > pressing > this button twice quickly generally moves you on through the list. I > think > that is a bug! > > All in all, very good. > > > > Kind Regards, > > Jackie Cairns > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq