[access-uk] Re: USB2?
- From: "carol pearson" <carol.pearson@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 16 Jun 2004 13:10:18 +0100
Won't some be Fire Wire, George? My machine has a mixture front and back of
the two.
--
Carol
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, June 16, 2004 1:08 PM
Subject: [access-uk] Re: USB2?
> Hi Ali,
>
> They should ALL be USB 2
>
> George.=20
>
> > -----Original Message-----
> > From: access-uk@xxxxxxxxxxxxx=20
> > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
> > Sent: 16 June 2004 12:24
> > To: access-uk@xxxxxxxxxxxxx
> > Subject: [access-uk] Re: USB2?
> >=20
> > George,
> > thanks very much. I have one of those in there. My question=20
> > is now, how would I know which USB slot is the USB2? I have=20
> > 8 of them 3 at the front and 5 at the back. Do they have=20
> > different connection or something?
> >=20
> > Thank you.
> > --------------------
> >=20
> > Ali LL.B
> > London UK
> >=20
> > alpot@xxxxxxxxxxxxxxxx
> >=20
> > ----- Original Message -----
> > From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
> > To: <access-uk@xxxxxxxxxxxxx>
> > Sent: Wednesday, June 16, 2004 11:37 AM
> > Subject: [access-uk] Re: USB2?
> >=20
> >=20
> > Hi Ali,
> >=20
> > Go to Control Panel, System, Device Manager. Go down the list of
> > devices to "Universal Serial Bus controllers", and right arrow to open
> > up that part of the list.
> >=20
> > If you have USB2, it will show up as something like, "Inter(r)
> > 82801DB/DBM USB 2.0 Enhanced Host Controller"
> >=20
> > USB 2 is essentially much faster than USB 1. USB 1 devices=20
> > will usually
> > still work with USB2, but at the lower speed.
> >=20
> > (I bet you wish you hadn't asked - smile!)
> >=20
> > George.
> >=20
> > > -----Original Message-----
> > > From: access-uk@xxxxxxxxxxxxx=3D20
> > > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
> > > Sent: 16 June 2004 11:18
> > > To: access
> > > Subject: [access-uk] USB2?
> > >=3D20
> > > Hi,
> > > how can I check if I have USB2 connection on my pc please? I=3D20
> > > don't even know what USB2 and what it does.
> > > Thank you.
> > > --------------------
> > >=3D20
> > > Ali LL.B
> > > London UK
> > >=3D20
> > > alpot@xxxxxxxxxxxxxxxx
> > > ** To leave the Access-UK list, send a message with the Subject:-
> > > ** unsubscribe
> > > ** to access-uk-request@xxxxxxxxxxxxx
> > > ** Please do not put text or signatures in the message body
> > > ** For other things like setting nomail when on holiday,
> > > ** or digest mode, send a message, to
> > > ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
> > > ** faq
> > > ** Please do not put text or signatures in the message body.
> > >=3D20
> >=20
> >=20
> > =3D0AThis Message has been scanned for viruses by McAfee Groupshield.
> > ** To leave the Access-UK list, send a message with the Subject:-
> > ** unsubscribe
> > ** to access-uk-request@xxxxxxxxxxxxx
> > ** Please do not put text or signatures in the message body
> > ** For other things like setting nomail when on holiday,
> > ** or digest mode, send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
> > ** faq
> > ** Please do not put text or signatures in the message body.
> >=20
> >=20
> > ** To leave the Access-UK list, send a message with the Subject:-
> > ** unsubscribe
> > ** to access-uk-request@xxxxxxxxxxxxx
> > ** Please do not put text or signatures in the message body
> > ** For other things like setting nomail when on holiday,
> > ** or digest mode, send a message, to=20
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
> > ** faq
> > ** Please do not put text or signatures in the message body.
> >=20
>
>
> =0AThis Message has been scanned for viruses by McAfee Groupshield.
> ** To leave the Access-UK list, send a message with the Subject:-
> ** unsubscribe
> ** to access-uk-request@xxxxxxxxxxxxx
> ** Please do not put text or signatures in the message body
> ** For other things like setting nomail when on holiday,
> ** or digest mode, send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:-
> ** faq
> ** Please do not put text or signatures in the message body.
** To leave the Access-UK list, send a message with the Subject:-
** unsubscribe
** to access-uk-request@xxxxxxxxxxxxx
** Please do not put text or signatures in the message body
** For other things like setting nomail when on holiday,
** or digest mode, send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:-
** faq
** Please do not put text or signatures in the message body.
Other related posts:
