[access-uk] Re: Tvonics signal loss on HDMI
- From: "Michael Moore" <mikeis@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 5 Jan 2013 17:07:05 -0000
Mo,
Thanks, yeah I've been using it this way since I purchased it in May, but
have now switched over to Scart...
We shall await!!
Kindest regards,
Mike
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of Mobeen Iqbal
Sent: 05 January 2013 16:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Tvonics signal loss on HDMI
Hi Mike.
In my experience, HDMI has always been patchy. the box should automatically
try and configure it self for the best HDMI resolution possible, but its
rare that people i've been instructing have ever gotten this to work.
personally unless you have to use HDMI, i'd use scartt. Maybe Pulse-Eight
will see fit to enhance the software for existing boxes, who knows i
certainly hope so!
all the best,
Mo.
On 05/01/2013 15:37, Michael Moore wrote:
> Hello,
>
> This problem happened again.. A while ago, I had problems with no
> signal through to the TV, Mo suggested unplugging and plugging in the
> cable between the Tvonics and TV. That solution worked, though Mo said
> about the Scart.. I was using the HDMI cable between the two items.
>
> This time however, I lost all signal and speech between Tvonics and
> TV.. I replaced the HDMI for a Scart lead and the unit is working a lot
quicker.
> The HDMI channels were very slow to react and the box lagged really
badly..
> Now with the Scart lead connecting them it is running a lot sweeter...
>
> Was the HDMI output on the Tvonics an issue?
>
> Kindest regards,
>
> Mike
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
