[access-uk] Re: Tvonics signal loss on HDMI
- From: Mobeen Iqbal <mobeeniqbal@xxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Sat, 05 Jan 2013 16:57:19 +0000
Hi Mike.
In my experience, HDMI has always been patchy. the box should
automatically try and configure it self for the best HDMI resolution
possible, but its rare that people i've been instructing have ever
gotten this to work. personally unless you have to use HDMI, i'd use
scartt. Maybe Pulse-Eight will see fit to enhance the software for
existing boxes, who knows i certainly hope so!
all the best,
Mo.
On 05/01/2013 15:37, Michael Moore wrote:
Hello,
This problem happened again.. A while ago, I had problems with no signal
through to the TV, Mo suggested unplugging and plugging in the cable between
the Tvonics and TV. That solution worked, though Mo said about the Scart.. I
was using the HDMI cable between the two items.
This time however, I lost all signal and speech between Tvonics and TV.. I
replaced the HDMI for a Scart lead and the unit is working a lot quicker.
The HDMI channels were very slow to react and the box lagged really badly..
Now with the Scart lead connecting them it is running a lot sweeter...
Was the HDMI output on the Tvonics an issue?
Kindest regards,
Mike
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
