Hi, As long as both units are using scart then the analogue transmission between them is irrevelant as scart is RGB. Regards Aedan. -----Original Message----- From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Ray Sent: Friday, October 19, 2012 12:08 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: TV "Sender - Receiver" Hello Tony. I may have mistaken what you are asking for. Your reference to remote controls sounds as if you might be wanting to use a remote control in a room separate from the actual TV. If that's what you want to do then stop reading now *smile*. If you want to watch signals from a freeview or satellite receiver which is one room on a TV in another room then read on. Things were simple when we had analogue PAL TV signals. Then you could buy a small sender which you plugged the RF out lead from your satellite receiver/VHS/DVD into, and that box re-transmitted the signal on (usually) channel 36. You could then tune into this on another analogue TV. Now that most, if not all, TVs being sold are digital only, in other words they no longer have an analogue capability, the situation is not so easy. And I guess pretty soon, the RF out capability of satellite boxes and DVDS etc. will start to disappear too because the number of analogue TVs will drop to zero pretty quickly. I haven't yet heard of a device which will re-transmit a digital TV signal. Mike Ray ----- Original Message ----- From: tony sweeney <mailto:deirton711@xxxxxxxxx> To: access-uk <mailto:access-uk@xxxxxxxxxxxxx> Sent: Friday, October 19, 2012 9:03 AM Subject: [access-uk] TV "Sender - Receiver" Morning All, Wonder if anyone would know of a device (say wireless for example) that would send a signal from one TV to another as in a TV remote control (zapper)? For example have sat in one room but not in the telly to which I wish to send to. Cheers, Tony Sweeney ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq