[access-uk] Re: Sound crackling
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 17 May 2007 00:15:40 +0100
It could be what is loosely termed a "dry joint".
You could also try removing, cleaning where possible, and
re-seating any plugable items. It could even simply be that
your soundcard needs to be removed, the edge connector
cleaned using a typists erasor, and reseated, making sure
the grounding screw is tightened properly.
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Dj Paddy
Sent: 16 May 2007 22:49
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Sound crackling
Hi Joe, it seems to stop after 15 minutes or so of use. The
HD's are fine I=20
ran stress tests on them to be safe though once I saw your
mail.
Dj Paddy
=D4=E0=06
----- Original Message -----=20
From: "Joe Paton" <joe@xxxxxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, May 16, 2007 9:57 PM
Subject: [access-uk] Re: Sound crackling
Hi DJ,
I had a similar problem. Mark, I say similar. The cause
was a Hard
disk breaking down. I ran the system which was a previous
backup,
from a new HD, and hey ho! clear as a bell.
Just thought I'd throw that into the pot.
Joe
At 17:42 16/05/2007, you wrote:
>I'm experiencing a very odd and very annoying problem.
>
>All of a sudden when two or more sounds are playing at the
same time=20
>through
>my Realtech soundcard, I'm getting crackling with my TTS.
Doesnt' matter=20
>if
>I use Window Eyes, dectalk Access 32, Windows Elaquince,
Jaws Elaquince.
>
>It doesnt' matter what the audio is coming from, ventrilo
server, winamp
>playback I get the crackling.
>
>I've updated my Realtech sound drivers to no avail.
>
>One of those, "Just started happening", things.
>
>Anyone ever had this or got a solution?
>
>I'm seriously reluctant to phone the system builders,
because as some may
>remember they had my computer for 6 or more weeks the last
time I did and=20
>it
>involved it going back twice.
>
>Could it be a bad chip?
>
>Cheers
>Dj Paddy
>
>** To leave the list, click on the immediately-following
link:-
>**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dunsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on
the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dfaq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dunsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dfaq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dunsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=3Dfaq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
No virus found in this incoming message.
Checked by AVG Free Edition.=20
Version: 7.5.467 / Virus Database: 269.7.1/805 - Release
Date: 15/05/2007 10:47
=20
No virus found in this outgoing message.
Checked by AVG Free Edition.=20
Version: 7.5.467 / Virus Database: 269.7.1/805 - Release
Date: 15/05/2007 10:47
=20
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
