[access-uk] Re: Solid state drive conversion

  • From: "Mark Threadgold" <m.j.threadgold@xxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 3 Jan 2010 09:01:46 -0000

Thanks Gordon.  

In my case I will be changing from a standard disk so I would expect the
speed increase to be quite marked.  I have used a couple of utilities and
stopped a lot of the uneccessary services running and have got the boot time
down from four and a half minutes to two and a half.  This model is renowned
for having a ridiculously long boot time, but it runs well ocne it's going.
I would want to see there are real advantages before splashing out, though.


Regards, 



Mark Threadgold 

Of all the things I have ever lost, The one I miss most is my mind...
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
G. McFarlane
Sent: 03 January 2010 04:52
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Solid state drive conversion

Hi Mark
I've got a Dell Mini9 which had an 8gb solid state harddrive and I upgraded 
it to a 16 gb one (much less than the one you're contemplating).
In general it works well - it responds to Windows with all usual functions. 
As for speed it may be marginally faster - my netbook is a bit sluggish and 
was helped by a larger Solid state drive and using Tune Up Utilities 2010. 
I'm not sure if you'll see a vastly improved speed change but I may be 
wrong. It's still pretty expensive for the Solid states in comparison to the

Satas or IDEs but if you have the need for the fastest it will probably help

a bit.
Gordon McFarlane
----- Original Message ----- 
From: "Mark Threadgold" <m.j.threadgold@xxxxxxxxxxxx>
To: "accessuk list" <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, January 02, 2010 12:55 PM
Subject: [access-uk] Solid state drive conversion


> Hi all.
>
> Has anyone swapped from standard hdd to a solid state drive in a laptop?
> Any pitfalls to look out for?
> I assume they can be partitioned and administered through windows and disk
> utilities in the same way as a standard hdd?
> Theoretically the boot time and swap file access times should plummet to
> almost instant, which should help speed up the running of the pc 
> generally.
> Has it really made that much difference?
>
> Main downfall I can see is cost.  SSD capacity is limited as yet, and best
> price I have found so far is a 128GB for 175 pounds.  Much larger than 
> this
> and prices jump to about 300.
>
> Any tips welcome.
>
> Mark Threadgold
>
> Of all the things I have ever lost, The one I miss most is my mind.. .
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: