[access-uk] Re: Screen resolution and colour
- From: "Andy Logue" <andy@xxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 20 Jan 2007 12:40:12 -0000
Hi again Andy.
On my computer, and by the way, I have High Contrast number 2 selected as
I'm very photo-sensitive, I have 600 by 800 selected.
When I press tab to get to this setting, jaws announces
"Screen Resolution Left Right Slider Zero percent 800 by 600 pixels"
If I press the right arrow key once, jaws announces
"20 percent 1024 by 768 pixels."
If I press it again, jaws announces,
"40 percent 1152 by 864 pixels"
If I press it again, jaws announces,
"60 percent 1280 by 768 pixels"
If I press it again, jaws announces,
"80 percent 1280 by 960 pixels",
and finally, again, jaws announces,
"100 percent 1280 by 1024 pixels."
If I arrow back to 0 percent 800 by 600, then press the tab key once. Jaws
announces,
"Colour quality more combo box Highest (32 bit ) 2 of 2.
If I up arrow once, jaws announces,
""Medium (16 bit)
If I press tab again, after returning to 32 bit, jaws announces,
"Identify",
Tab again and jaws announces,
"Trouble Shoot"
and finally again, jaws announces,
""Advanced
I don't know what Identify means, so I'll not click on it in case I end up
in trouble.
The Trouble Shoot is self explanatory. and the Advanced is about changing
plug and play settings. I can go in here to check it if you fancy, but I
doubt that you went in there.
Get back to me if the above does not help you and I'll try writing up a step
by step.
Best wishes.
Andy
----- Original Message -----
From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, January 20, 2007 12:06 PM
Subject: [access-uk] Re: Screen resolution and colour
> Hi Andy - when I change to 600x800 last night, it messed up my JAWS
> setting
> for XP! as it modified the desk top. I was looking under display in
> control
> panel, and saw on the appropriate tab a list of resolutions; originally,
> mine was set to 1024x768 with a percentage of %9 [not sure what the
> percentage thing is about], when I selected 600x800, the percentage went
> down to 0, and JAWS kept seeing blanks everywhere, no matter what window I
> was in; it would read emails or documents in say all mode, but not line by
> line. From what you say, and waht I seem to remember, 600x800 is the
> correct
> setting, but Christopher talked about colours, and this is where I'm
> stuck,
> so if you or anybody can help me get these setting right for JAWS, then
> I'd
> apreciate it.
>
> Thanks - Andy
> ----- Original Message -----
> From: "Andy Logue" <andy@xxxxxxxxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 20, 2007 11:54 AM
> Subject: [access-uk] Re: Screen resolution and colour
>
>
> Hi Andy.
>
> My settings are 600 by 800.
>
> Are you able to navigate your way back to change it or would youlike me to
> walk you through it.
>
> Best wishes.
> Andy
>
>
>
> ----- Original Message -----
> From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, January 20, 2007 10:33 AM
> Subject: [access-uk] Screen resolution and colour
>
>
>> My screen resolution and colour is set to: 1152x864, colour: 32 bpp; I
>> don't
>> think this is right for JAWS, I seem to think it should be 600x800, is
>> that
>> right, and what should colour be set to?
>>
>> Thanks - Andy
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> --
> This email has been verified as Virus free
> Virus Protection and more available at http://www.plus.net
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
