[access-uk] Re: Recording from external source using Goldwave
- From: "Jim Williams" <jwbr33694@xxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 20 Jun 2012 21:04:18 +0100
Hi Peter,
I've tried all the suggestions made by you and others and am still unable to do
any recording.
I have noticed the following:
What ever check box I check in playback, recording or Volume tabs and then
click ok at the end of the tab, if I go back in to make sure they are still
checked every one has become unchecked. It doesn't matter what I check the box
with, Enter key, Space bar or JAWS simulated mouse click the results are the
same.
I'm guessingsome other setting is incorrect and I cannot progress to the point
of checking selection boxes until I find this wrong setting but Goldwave gives
me no clues whatsoever.
Any further ideas?
Jim
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of ?
Peter Logue ?
Sent: 20 June 2012 09:31
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Recording from external source using Goldwave
Hi Jim.
I'm using goldwave 5x but I don't think it will differ too much from your
version.
Here is a heads up for you in finding your correct device. Its not a step by
step, but you should get there in the end.
In goldwave, hit F11 to open control properties.
Now arrow along to volume tab.
One tab in here and you will have a selection of sound cards to choose from.
Its really only a matter of trying one after the other. There might be a few if
you are using other sound cards other than the computers default sound card.
Select one for instance and give it a try...then try it again checking the mute
checkbox, raising the volume to 100 etc. If at first you don't succeed Its just
a play with it sort of thing. But once you have it working remember your
selection.
Peter ♫
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Jim
Williams
Sent: 19 June 2012 23:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Recording from external source using Goldwave
Hi Folks,
Using Goldwave 5.67, Soundblaster Live 5.1, JAWS 13 and XP Home
I'm trying to record tracks from my cassette collection to put onto an MP3
player, hopefully in time for my holiday next week.
I can record the tracks ok, but I cannot listen to the track playing, in order
to monitor start and finish of each track, as I record.
Earlier on in this attempt I was able to hear the track as it played but even
though the sound was playing the supposed recorded track was empty., ie I had
2.40 minutes of silence.
If anyone can give me clearstep by step instructions and confirm what my
record, playback and device settings should be, I'd be very grateful.
Jim Williams
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
