[access-uk] Re: Problems with boot up.
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 29 Apr 2005 17:11:08 +0100
Hi Petrina,
I am only guessing, but it sounds like you may have lost a BIOS setting, and
it may not be recognising your hard drive on first boot. When this happens
again, try pressing F1, and see if it springs to life.
All the best
--
Computer Room Services: the long cane for blind computer users.
Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589
mobile: +44(0)7956 334938,
Email: Steve@xxxxxxxxxxxxxx
Web site: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx]On Behalf
Of Petrina Delves
Sent: 28 April 2005 14:48
To: access UK
Subject: [access-uk] Problems with boot up.
Hi all,
I have found over the last cuppal of days, that when I press the start
button, to boot up the computer, nothing happens, and I have to press the
reset button about three or four times, before the hard drive will come to
life. So is this my hard drive packing up, or the buttons on the tower?. My
tower and hard drive are four years old. Thanks for any help.
All the best
Petrina,
Southampton UK
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
