[access-uk] Re: Problem with Kurzweil.
- From: "Tristram Llewellyn" <tris-l@xxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 20 Sep 2005 16:21:40 +0100
Take a look in the scanner settings and see if you can identify the "scanner
source" setting. Let us know what that is and then we may be able to help.
Regards.
Tristram Llewellyn
Sight and Sound Technology
Technical Support
www.sightandsound.co.uk
----- Original Message -----
From: "Petrina Delves" <aunk99@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, September 20, 2005 4:09 PM
Subject: [access-uk] Re: Problem with Kurzweil.
Hi Tristram,
I am useing an HP scanjet 6300c.
All the best
Petrina,
Southampton UK
----- Original Message -----
From: "Tristram Llewellyn" <tris-l@xxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, September 20, 2005 10:02 AM
Subject: [access-uk] Re: Problem with Kurzweil.
> If the problem has started to occur recently it may be to do with a recent
> update or new software installed that runs in your system tray.
> Occasiionally an application runnning in the system tray may cause K1000
> to
> loose focus whilst it is reading and therefore when the using hits control
> or start/stop reading key to stop speech they have no control over the
> application.
>
> An alternative line of thought may be around the scanner, some non-Epson
> scanners will produce an interface during the scanning operation that
> causes
> K1000 to loose focus. Can you let us know which scanner you have.
>
> Regards.
>
> Tristram Llewellyn
> Sight and Sound Technology
> Technical Support
> www.sightandsound.co.uk
>
> ----- Original Message -----
> From: "Petrina Delves" <aunk99@xxxxxxxxxxxxx>
> To: "access UK" <access-uk@xxxxxxxxxxxxx>
> Sent: Monday, September 19, 2005 7:23 PM
> Subject: [access-uk] Problem with Kurzweil.
>
>
> Hi all,
>
> I am using Kurzweil version 9.03. Please can someone tell me why, after
> Kurzweil had scanned the page, and started reading it, no matter what I
> did
> I could not get Kurzweil, to stop reading the scanned page. Thanks in
> advance for any help.
>
> All the best
> Petrina,
> Southampton UK
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
