[access-uk] Re: Printing off labels

  • From: "roger south" <roger.south@xxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Wed, 19 Sep 2007 11:53:39 +0100

Hi Ron

I haven't looked for a long time but it used to give a full sheet of the same address but only one at a time of different addresses. This made lining them up very hard once the first line had been used up.

I too use an old version of Word Perfect as well as my Dymo label writer. I am still convinced Word Perfect is a far better piece of kit than MS Word and if it wasn't for the fact some bits are a little incompatible I would use it all the time.

Roger

Some mistakes are too much fun to only make once.


----- Original Message ----- From: "ron sears" <r.sears1@xxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, September 19, 2007 11:37 AM
Subject: [access-uk] Re: Printing off labels


Wendy, if you go into options on the label page in word you can chose the make of labels, say how many you want across and down. It takes a bit of setting up but once it is done it will stay until you delete it. I use Avery labels 21 to
a sheet, 3 across and 7 down.  It seems as though you are happy with Word
Perfect so that's good.

Cheers

Ron
----- Original Message ----- From: "Wendy Sharpe" <w.sharpe@xxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, September 18, 2007 4:52 PM
Subject: [access-uk] Re: Printing off labels


Just to explain a bit more.  I find Word envelopes and labels very
complicated.  In labels there are two options, one is to print just one
label, and the other is to print the same label on a sheet.  This is not
what I want.  I want to print a sheet of different labels.

I have looked at the Microsoft training pages about this, and frankly it all
seems like too much hard work.  What I still do is use an old DOS computer
with WordPerfect 5.1.  Setting up labels takes a little while, but
everything is straightforward, and once the sheet is set up it stays exactly
as it is.  You can save it as a blank file and use it as many times as you
like. You can also set up sheets of non-standard sizes, which Word doesn't
seem to like.

Wendy

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andy Collins
Sent: 18 September 2007 16:23
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Printing off labels

Just following a comment made by Wendy on another thread, I too would like
to know how to successfully print off address labels, so if anybody can give

some help in this, then at least 2 of us on here would appreciate it -

Andy

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.487 / Virus Database: 269.13.22/1013 - Release Date: 17/09/2007
13:29


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: