[access-uk] Re: Networking clarification
- From: "Chris Hallsworth" <christopherh40@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 22 Nov 2009 16:01:33 -0000
Hannah you do not need a physical telephone. So long as a line exist within
the exchange then you will get a signal which comes down the line.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Hannah Day
Sent: 22 November 2009 14:46
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Networking clarification
Ar ok so will i need a land line then?
Chat soon hannah
--
Hannah Day
E-mail: hannahday1989@xxxxxxxxxxxxxx
MSN: hannahday1989@xxxxxxxxxxxxx
Skype: hannahday
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ibrahim Gucukoglu
Sent: 22 November 2009 14:45
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Networking clarification
Hi George.
That isn't necessarily so *smile*. A lot of routers these days are
configured for wireless set-up, you can set the wireless router up using a
manufacturer supplied key which is usually printed on the underside of the
unit. All you need do therefore is plug the router in and follow the quick
start or equivalent guide, connect to the router using wireless and then you
can log in to change the settings if you want. This is how I configured my
Be Broadband modem.
All the best, Ibrahim.
----- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, November 22, 2009 2:34 PM
Subject: [access-uk] Re: Networking clarification
> The first computer usually needs to be connected by Ethernet to access
> and set up the wireless router. However, once that is done, and given
> that that PC has wireless connectivity, you can disconnect the
> Ethernet cable and change it to wireless access.
>
> George.
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> Behalf Of Chris Hallsworth
> Sent: 22 November 2009 14:21
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Networking clarification
>
> Hello all,
> True or false. When setting up a network, the first computer requires
> an
> Ethernet connection, whereas clients on the network can connect either
> via
> Ethernet or wireless. If this is true, can you please explain why? I
> did
> pass a module on networking at university, but just need
> clarification.
> Thanks in advance.
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
