[access-uk] Re: NVDA voice change
- From: Barry Toner <barry@xxxxxxxxxxxxxxxxx>
- To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 9 May 2012 20:41:38 +0100
Hi,
A quick keystroke to save settings as well is,
CTRL + Insert, C.
Regards,
Barry.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Vince Thacker
Sent: 08 May 2012 22:26
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] NVDA voice change
Norman,
I took the liberty of changing the subject line so hope you don't mind.
All the options are on the NVDA menu. Press Insert and N (for November),
then Preferences, then Voice. Or if you want to use a different speech
synthesiser, it's Preferences and then Synthesiser, again followed by
Preferences and Voice is you still want to change the voice.
Be sure to save your changes by going to Insert plus N for the menu, the S
for Save Configuration. To save any changes automatically every time, go to
Prefernces, General Settings, then Save configuration on exit.
To get a list of all the NVDA keystrokes, go to the menu, Help, Keyboard
Command Quick Reference.
NVD~A works with a whole range of speech synthesisers, including Microsoft
SAPI4, SAPI5, MS Speech Platform, and several that are detailed on the NVDA
web site. So it works with voices too numerous to mention.
Vince.
----- Original Message -----
From: "Norman McGuffie" <normanmcguffie@xxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, May 08, 2012 9:57 PM
Subject: [access-uk] Re: TVonics Talking Freeview Recorder
> Hello I have never asked a question before, so I hope that you all can
> help. Does anyone know how to change the voice on the screen reader NVDA?
> ----- Original Message -----
> From: "william lomas" <will.d.lomas@xxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Monday, May 07, 2012 10:17 PM
> Subject: [access-uk] Re: TVonics Talking Freeview Recorder
>
>
>> it is the same as the RNIB one I think, just that the RNIB version has it
>> all pre-installed, obviously you'd need sighted help to add the software
>> on to it.
>> From what I have read you install the software from the USB drive, then
>> the voice file
>>
>> On 7 May 2012, at 21:48, G. McFarlane wrote:
>>
>>> Hi
>>> For those who've updated the software:
>>> 1. Is it easy
>>> 2. Is there any likely difference between this one and the RNIBs one
>>> once it's updated?
>>> Thanks in advance.
>>> Gordon
>>>
>>> -----Original Message----- From: Yusuf
>>> Sent: Monday, May 07, 2012 7:41 PM
>>> To: access-uk@xxxxxxxxxxxxx
>>> Subject: [access-uk] Re: TVonics Talking Freeview Recorder
>>>
>>> I'm sure your aware but thought I'd point it out just encase, this
>>> version will need software updating before it talks.
>>> Yusuf
>>>
>>> On 07/05/2012 19:30, Peter Beasley wrote:
>>>> This is the link
>>>> http://www.electronicworldtv.co.uk/TVonics_DTR-Z500HD_500GB_Freeview_HD_and_Recorder__1906_d
>>>>
>>>> ----- Original Message ----- From: "G. McFarlane"
>>>> <gmcf@xxxxxxxxxxxxxxxxxx>
>>>> To: <access-uk@xxxxxxxxxxxxx>
>>>> Sent: Monday, May 07, 2012 7:04 PM
>>>> Subject: [access-uk] Re: TVonics Talking Freeview Recorder
>>>>
>>>>
>>>>> Hi
>>>>> Could someone please re-post the site where theTVonics talking
>>>>> Freeview recorder is at half the RNIB price.
>>>>> Gordon McFarlane
>>>>>
>>>>> -----Original Message----- From: john coley
>>>>> Sent: Monday, May 07, 2012 12:02 PM
>>>>> To: access-uk@xxxxxxxxxxxxx
>>>>> Subject: [access-uk] TVonics Talking Freeview Recorder
>>>>>
>>>>> Hi everybody, today I want to tell you about the recording facilities
>>>>> of the
>>>>> TVonics box. There are two types of recording, instant record, whereby
>>>>> you
>>>>> just press the record button, third button right hand side of the
>>>>> remote,
>>>>> followed when prompted by ok, the other timer recording, which can
>>>>> either be
>>>>> done by setting a timer manually, whereby you enter the start and end
>>>>> times,
>>>>> or, which is far easier, using the guide.
>>>>> When you find a programme in the guide you want to record just press
>>>>> record, and it will be scheduled for recording. If the programme is
>>>>> one of a
>>>>> series you'll be asked if you want to record all the programmes in the
>>>>> series, and if so to press the blue button, bottom row right hand side
>>>>> of
>>>>> the remote, and it'll schedule recording for all episodes of that
>>>>> programme
>>>>> it finds. If it's just a one off programme you'll just be prompted to
>>>>> press
>>>>> ok.
>>>>> One thing to note about series recording. Where, for instance, a
>>>>> programme
>>>>> is repeated on the corresponding plus one channel it will record those
>>>>> too.
>>>>> John.
>>>>>
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>>
>>>>> __________ Information from ESET NOD32 Antivirus, version of virus
>>>>> signature database 7118 (20120507) __________
>>>>>
>>>>> The message was checked by ESET NOD32 Antivirus.
>>>>>
>>>>> http://www.eset.com
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> __________ Information from ESET NOD32 Antivirus, version of virus
>>>> signature database 7118 (20120507) __________
>>>>
>>>> The message was checked by ESET NOD32 Antivirus.
>>>>
>>>> http://www.eset.com
>>>>
>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
