[access-uk] Re: More Focus Vlue Problems

  • From: "Terry Clasper" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "terry.clasper" for DMARC)
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 4 Jun 2017 16:01:10 +0100

Hi!
Never seen this one on the focus before but I have known of similar
calibration issues with other devices.
So what happens if you charge the focus up to maximum, so the indicator says
%100.
Then run it all the way down, then go through the cycle again.
If the problem is a calibration issue rather than a false indication
problem, that should sort it out.


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Iain Lackie
Sent: 04 June 2017 15:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] More Focus Vlue Problems

Hi
Well, I have my replacement Focus and have a problem. The battery usage
indicator seems to be indicating a false percentage. For example, the
battery is exhausted but when I power on, the percentage shown is 80%. This
means that the battery will die without giving me a low battery warning. Has
anyone had this problem and is there anything I can do about it? Could I be
moving on to my fourth Focus 14 since last October?

Iain** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: